GSM-Forum - View Single Post - GPG EMMC Chinese Andorid (MTK, SPD), Original Android Tool Detail Manual ;)

**Dipendra Pathak** · 07-08-2014, 15:30

How to take info of Android Devices (with USB Cable + Battery)?

You can find the android device info using the following manual:

1. Open the Volcano software

2. Click on “Android” Tab

3. Click one “USB Mode” Sub-Tab

4. Tick on “Read Info”

5. Choose the CPU type “MTK or SPD6820” from drop-down menu

6. Be sure to tick on “USB Mode”

7. Click on “Start”

8. Power off the Device

9. Take Out the Battery from the Device.

10. Insert the Battery to the Device again.

11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.)

12. Hold and press Boot Key and insert the USB cable to the Device.

13. Wait until the driver installed.

14. Wait until you see the saving Screen short as shown below:

how to take a screenshot on a pc

15. Done.

07-08-2014, 15:30	#2 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,621	How to take info of Android Devices (with USB Cable + Battery)? You can find the android device info using the following manual: 1. Open the Volcano software 2. Click on “Android” Tab 3. Click one “USB Mode” Sub-Tab 4. Tick on “Read Info” 5. Choose the CPU type “MTK or SPD6820” from drop-down menu 6. Be sure to tick on “USB Mode” 7. Click on “Start” 8. Power off the Device 9. Take Out the Battery from the Device. 10. Insert the Battery to the Device again. 11. Press “Boot Key” if necessary (Boot Key might be Vol- / Vol+ / Vol- and Home, Vol- and Home etc.) 12. Hold and press Boot Key and insert the USB cable to the Device. 13. Wait until the driver installed. 14. Wait until you see the saving Screen short as shown below: how to take a screenshot on a pc 15. Done.