| Symphony P5 MTK6572 Read Done
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM20)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0xEC000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Reading infr(EMMC)...
PRELOADER BaseAddr:0x0 Size:0x1400000
MBR BaseAddr:0x1400000 Size:0x80000
EBR1 BaseAddr:0x1480000 Size:0x80000
PRO_INFO BaseAddr:0x1500000 Size:0x300000
NVRAM BaseAddr:0x1800000 Size:0x500000
PROTECT_F BaseAddr:0x1D00000 Size:0xA00000
PROTECT_S BaseAddr:0x2700000 Size:0xA00000
SECCFG BaseAddr:0x3100000 Size:0x20000
UBOOT BaseAddr:0x3120000 Size:0x60000
BOOTIMG BaseAddr:0x3180000 Size:0x600000
RECOVERY BaseAddr:0x3780000 Size:0x600000
SEC_RO BaseAddr:0x3D80000 Size:0x40000
MISC BaseAddr:0x3DC0000 Size:0x80000
LOGO BaseAddr:0x3E40000 Size:0x300000
EXPDB BaseAddr:0x4140000 Size:0xA00000
ANDROID BaseAddr:0x4B40000 Size:0x28A00000
CACHE BaseAddr:0x2D540000 Size:0x17800000
USRDATA BaseAddr:0x44D40000 Size:0x52C00000
FAT BaseAddr:0x97940000 Size:0x53640000
BMTPOOL BaseAddr:0xFFFF00A8 Size:0x0
Done.
1. Phone switch on with battery
2. Need to open the USB debugging
3. Setting defined or line to phone
4. Need Phone root.
1.Phone Power off
2.Add SU, is for not normally Root, you can choose this
3.Clear code for USB debugging can not manually open
4.With clear code function Cleared password, please recover ROOT
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM20)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6572 SW:0000 Ver: CA01
Downloading Boot8 ...
EMMC Size: 0xEC000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
Waiting for USB Port...
Set DA USB VCOM Port (COM21)
File Mode: C:\Users\KK\Desktop\Symphony P5 MTK6572
Reading(EMMC)...(0xA0000000)
Saving as scatter file...
OK. out: E:\Flash Soft\China\Flash Files\Android\China Android\Symphony\P5\MT6572_141015140112
Read OK.
total: 22 mins16 s
File save to:C:\Users\KK\Desktop\Symphony P5 MTK6572 |