Disclaimer: I’m or any other person related to this is not responsible for anything that happens to your phone. This most likely will void your warranty.
Download Dc Unlocker From Here ( It not my development all credits goes to its developers )
DC Unlocker Supported models for reading bootloader code Huawei Ascend G300
Huawei Ascend G330
Huawei Ascend G330D
Huawei Ascend G600
Huawei Ascend G600D
Huawei U8815
Huawei U8815N
Huawei U8825
Huawei U8825D
Huawei U8950
Huawei U8950-51
Huawei U8950D
Huawei U8950N
Huawei U8950N-51
Huawei Ascend G510-0100
Huawei Ascend G510-0200
Huawei Ascend G510-0251
Huawei Ascend Y300-0100
Huawei Ascend Y300-0151
Huawei Valiant
Orange Daytona Download Huawei Phone Drivers
Extract them in your computer and launch "DriverSetup.exe".
WARNING: DRIVERS MUST BE DOWNLOADED FROM THIS PROCEDURE ONLY, OTHERWISE DETECTION OF THE PHONE WILL NOT WORK.
Wait till drivers fully install and this message disappear. After message disappeared, restart computer (necessary step)
Turn off phone. Press "Volume down", "Volume up" and "Power" buttons. Hold them pressed for 5 seconds. Phone screen should become purple/pink. Connect phone to computer using USB cable
Further actions require DC-unlocker software
Launch DC-Unlocker client software
Detect device by selecting Huawei phones from manufacturers drop down menu list, then click magnifying glass button
Wait till program detects it
Detection info will show bootloader’s code, which will be used in unlock procedure
Download ADB toolkit
Install it, then locate “fastboot.exe” file in installation directory
Turn off phone. Press and hold Vol- and Power buttons to enter fastboot mode
Connect phone to pc via usb cable
Click “windows” + “R” button, type in “cmd” and click “OK”, command window will open
In command window enter directory of where ADB toolkit is installed and check that the device is connected to computer properly. To do so, enter fastboot devices, and press Enter, if a message such as 156b267e fastboot is displayed, the connection is set up properly
Type in unlocking command - fastboot oem unlock password, for example, fastboot oem unlock 1531461291861883 (unlock code generated by dc unlocker )
After entering the unlock code your device restarts and sets to standby mode
To check bootloader's lock status simply repeat detection of the phone by DC-Unlocker or enter “fastboot oem get-bootinfo” in command window
Thanks to Dc Unlocker Team.
Congratulations All done you have unlocked bootloader now. Br,
Babar Abbasi