GSM-Forum - View Single Post - can NOT unlock Samsung Galaxy S4 SGH-M919

GSMWW · 11-04-2014, 21:05

Hello Octoplus Mod,
Since got your box back from July until now I am unable to unlock any Samsung galaxy S4 either from ATT, Tmobile, etc. I was so busy and did not have time to report here (We just went online purchase the code and it is much faster)

I have Tmobile working sim card inserted and following all the instructions showed below but no luck. I did not root this phone yet.

It happens again today with this Tmobile SGH-M919
Android version 4.4.4
Baseband version M919UVUFNH7
kERNEL Version 3.4.0-2437203 dpi@SWDD5915 #1
Wed Aug 27 21:44:08 KST 2014
Build # KTU84P.M919UVUFNH7
------
------
Securiy Software Version
MDF v1.0 Release 3
VPN v1.4 Release 2

================================================== ===
Welcome to Octoplus/Octopus Box Samsung software version 1.7.3
-----------------------------------------------------------------------------------
To connect SGH-I317 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Press Home button.
11. Go to dial window.
12. Enter "*#9090#" number.
13. Select "DM/UM over HS-USB".
14. Restart phone.
15. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect SGH-M919 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-M919
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM29
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM29
Selected model: SGH-M919
Mode: Emergency
Codes for SGH-M919 phone in emergency mode can’t be read
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM29
Selected model: SGH-M919
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM29
Mode: Emergency

Thanks!

11-04-2014, 21:05	#1 (permalink)
GSMWW Insane Poster Join Date: Aug 2014 Posts: 71 Member: 2249425 Status: Offline Thanks Meter: 3	can NOT unlock Samsung Galaxy S4 SGH-M919 Hello Octoplus Mod, Since got your box back from July until now I am unable to unlock any Samsung galaxy S4 either from ATT, Tmobile, etc. I was so busy and did not have time to report here (We just went online purchase the code and it is much faster) I have Tmobile working sim card inserted and following all the instructions showed below but no luck. I did not root this phone yet. It happens again today with this Tmobile SGH-M919 Android version 4.4.4 Baseband version M919UVUFNH7 kERNEL Version 3.4.0-2437203 dpi@SWDD5915 #1 Wed Aug 27 21:44:08 KST 2014 Build # KTU84P.M919UVUFNH7 ------ ------ Securiy Software Version MDF v1.0 Release 3 VPN v1.4 Release 2 ================================================== === Welcome to Octoplus/Octopus Box Samsung software version 1.7.3 ----------------------------------------------------------------------------------- To connect SGH-I317 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->Developer options. 3. Turn on "USB Debugging" option. 4. When message is appear press "Yes". 5. Go to dial window. 6. Enter "#7284#" number. 7. Set "UART" radio button to "MODEM" value. 8. Go to "Qualcomm USB Settings". 9. Select "RNDIS+DM+MODEM". 10. Press Home button. 11. Go to dial window. 12. Enter "#9090#" number. 13. Select "DM/UM over HS-USB". 14. Restart phone. 15. Press "Read Info" in software. ----------------------------------------------------------------------------------- To connect SGH-M919 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM1 Selected model: SGH-M919 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM29 Mode: Emergency ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM29 Selected model: SGH-M919 Mode: Emergency Codes for SGH-M919 phone in emergency mode can’t be read ----------------------------------------------------------------------------------- Platform: Samsung Android Selected port: COM29 Selected model: SGH-M919 Phone was not found on the selected port! Searching for USB diagnostic port... Connecting to phone on COM29 Mode: Emergency Thanks!