View Single Post
Old 11-29-2014, 07:03   #24 (permalink)
nandkishorgupta
Freak Poster
 
Join Date: Mar 2010
Posts: 201
Member: 1260168
Status: Offline
Thanks Meter: 58
Hello sir iam facing problem whenever i tryied to flash zte s183 always giving error riff shows 8mb flash file but can't flash blinking mobile & z3x jtag shows 16mb & gives error
log is here

EasyJtag Suite ver.: 1.6.3.0 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows XP (build 2600, Service Pack 3).

For support and updates visit EasyJtag ? most powerfull eMMC and JTAG tool on market. - EMMC BOX, JTAG BOX ,Z3X , BOOT REPAIR , FORENSICS TOOL
Check security...OK
Initialising: ZTE S168 Config ver.:1.00
I/O Level set to : 2200 mV
Box S/N: XXXXXXXXXXXXX ,FW Ver.: 01.50
Connecting to Target...
JTAG device: QSC1110
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting NOR memory parameters of bank (0) ...
NOR FlashID:0001:007E 'S29NS128J 16MB (Spansion)' found
Writing memory from file...G:\EASY Jtag\Files\ZTE\S183\ZTE_S183_dump_rom1_16mb.bin
embeddedice handshake timeout
Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
dcc_fastnor_write_pages error (PACKET_ADRESS:00010000,PACKET_LENGTH:00008000,MAX _DCC_BUFFER_LENGTH:00010c00,f:00) happened...
Failed writing file G:/EASY Jtag/Files/ZTE/S183/ZTE_S183_dump_rom1_16mb.bin to NOR flash 0 at offset 0x00010000
  Reply With Quote
 
Page generated in 0.12618 seconds with 6 queries