GSM-Forum - View Single Post - Sptool Flasher Problems/Error/ Solution All At One Place

Rahul_Bhutani · 12-07-2014, 11:31

Errors and why Its occures

1] S_UNSUPPORTED_OPERATION(1040):==

Scatter file does not fit the phone. For example, in 6577 the title is present, and the phone is actually 6573

2] S_DA_EMMC_FLASH_NOT_FOUND(3144):==

Besides problems with iron can be Scatter when the file is not the phone. For example in the title is present emmc, and the phone is actually a MTD flash.

3]S_BROM_CMD_STARTCMD_FAIL(2005):==

On phones with MTD flash if an error occurs:
1] When you select Download to block preloader or dsp_bl not set daw. You should use the appropriate version SPFT, such v2.xxx for phones MT6573, or off DA Download All .
2] When you select Download to block preloader or dsp_bl set daw. It is necessary to uncheck these blocks! If these blocks need to flash, it is necessary to connect the phone to BOOTROM.
3] When selecting Readback , Format , or MemoryTest . It is necessary to connect the phone to BOOTROM.

4] S_FT_READBACK_FAIL(4009):==

In addition to reading errors in the phone the same error for errors in the file system PC. Eg not enough space for a file or file can not be overwritten because it is locked. To clarify the log should look.

5] S_FT_NEED_DOWNLOAD_ALL_FAIL(4050):==

Do not match the size of the blocks in the PMT and scatter. We must look at the log line BROM_DLL

Partition 13 (USRDATA) size changed from 0x0000000000000000 to 0x000000000B620000

This error may occur after the curve editing scatter during treatment error 8038. Treated loading FT through all blocks, or only one block userdata , then the size in the PMT should switch to the right. Instead, the entire block can be sewn userdata_nvram_only.img from its backup file or a pacifier.

6] S_DL_PC_BL_INVALID_GFH_FILE_INFOR(5066):==

Wrong files. For example when the scatter of the chosen folder is not yet prepared for the FT files. It is necessary to choose the scatter in the folder prepared for FT files.

7]SP FLASH TOOL ERROR(8038):==

This error Occure If:=

For phones with the old type scatter (MT6515 / 16/17/73/75/77/89):
Names and location of the blocks in the scatter differ from the table inside the phone (PMT). We must look SP_FLASH_TOOL.log and look at it line NOT MATCH

Example=

NandLayoutParameter :: CompareIsNandLayoutMatched (): NOT MATCH: load item key (CUSTPACK2), value (0x3444000), target item key (CUSTPACK), value (0x3444000)

in this example, it is necessary to replace the name scatter CUSTPACK2 on CUSTPACK. If a few differences, this error will occur until the scatter after amendment does not become identical to the PMT. You can just fix it, if we compare the tables are a little higher in the log line NOT MATCH. The first of scatter, the second of the PMT phone. It is necessary that all blocks in the names scatter were the same as in the second table

Edit scatter must be carefully! Change the names and the number of lines to save the original! Some manage to remove the newline and string imenm unit is on one line with a brace. FT sees this block without PMT and writes it. Then we need to spend efforts to restore this table.

Best Regards
Rahul_Bhutani

12-07-2014, 11:31	#2 (permalink)
Rahul_Bhutani No Life Poster Join Date: Oct 2010 Location: India Age: 31 Posts: 7,456 Member: 1713856 Status: Offline Sonork: Uninstalled Thanks Meter: 4,500	Errors and why Its occures 1] S_UNSUPPORTED_OPERATION(1040):== Scatter file does not fit the phone. For example, in 6577 the title is present, and the phone is actually 6573 2] S_DA_EMMC_FLASH_NOT_FOUND(3144):== Besides problems with iron can be Scatter when the file is not the phone. For example in the title is present emmc, and the phone is actually a MTD flash. 3]S_BROM_CMD_STARTCMD_FAIL(2005):== On phones with MTD flash if an error occurs: 1] When you select Download to block preloader or dsp_bl not set daw. You should use the appropriate version SPFT, such v2.xxx for phones MT6573, or off DA Download All . 2] When you select Download to block preloader or dsp_bl set daw. It is necessary to uncheck these blocks! If these blocks need to flash, it is necessary to connect the phone to BOOTROM. 3] When selecting Readback , Format , or MemoryTest . It is necessary to connect the phone to BOOTROM. 4] S_FT_READBACK_FAIL(4009):== In addition to reading errors in the phone the same error for errors in the file system PC. Eg not enough space for a file or file can not be overwritten because it is locked. To clarify the log should look. 5] S_FT_NEED_DOWNLOAD_ALL_FAIL(4050):== Do not match the size of the blocks in the PMT and scatter. We must look at the log line BROM_DLL Partition 13 (USRDATA) size changed from 0x0000000000000000 to 0x000000000B620000 This error may occur after the curve editing scatter during treatment error 8038. Treated loading FT through all blocks, or only one block userdata , then the size in the PMT should switch to the right. Instead, the entire block can be sewn userdata_nvram_only.img from its backup file or a pacifier. 6] S_DL_PC_BL_INVALID_GFH_FILE_INFOR(5066):== Wrong files. For example when the scatter of the chosen folder is not yet prepared for the FT files. It is necessary to choose the scatter in the folder prepared for FT files. 7]SP FLASH TOOL ERROR(8038):== This error Occure If:= For phones with the old type scatter (MT6515 / 16/17/73/75/77/89): Names and location of the blocks in the scatter differ from the table inside the phone (PMT). We must look SP_FLASH_TOOL.log and look at it line NOT MATCH Example= NandLayoutParameter :: CompareIsNandLayoutMatched (): NOT MATCH: load item key (CUSTPACK2), value (0x3444000), target item key (CUSTPACK), value (0x3444000) in this example, it is necessary to replace the name scatter CUSTPACK2 on CUSTPACK. If a few differences, this error will occur until the scatter after amendment does not become identical to the PMT. You can just fix it, if we compare the tables are a little higher in the log line NOT MATCH. The first of scatter, the second of the PMT phone. It is necessary that all blocks in the names scatter were the same as in the second table Edit scatter must be carefully! Change the names and the number of lines to save the original! Some manage to remove the newline and string imenm unit is on one line with a brace. FT sees this block without PMT and writes it. Then we need to spend efforts to restore this table. Best Regards Rahul_Bhutani