GSM-Forum - View Single Post - SD Card Unbrick Solution by Easy-JTAG Manual

.:MobileLife:. · 12-12-2014, 08:33

Creating MAGIC CARD from ZBIN Image.

Step 1 Run Plugin

Step 2 Browse zbin file

Step 3 Select SD cared reader

Step 4 Write SD cared

Magic Cared is ready for boot repair now do these steps.

Recovery Phone by SD Unbrick card

1. Insert SD Card in phone SD card slot and attach battery
2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!)
3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used
4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one.
5. Flash phone with ODIN with PIT file!
6. Repair Done.

Creating MAGIC CARD from BIN Dump

Do step 1 and 2 same as above.

Step 3 and 4.

BR.
Siddeque.

12-12-2014, 08:33	#11 (permalink)
.:MobileLife:. No Life Poster Join Date: Oct 2005 Location: iSiddeque Age: 41 Posts: 2,009 Member: 188260 Status: Offline Sonork: 100.1590438 Thanks Meter: 428	EasyJTAG Magic SD Card Tool Operation Picture Manual for new bees. Creating MAGIC CARD from ZBIN Image. Step 1 Run Plugin Step 2 Browse zbin file Step 3 Select SD cared reader Step 4 Write SD cared Magic Cared is ready for boot repair now do these steps. Recovery Phone by SD Unbrick card 1. Insert SD Card in phone SD card slot and attach battery 2. Put phone in Download mode by USB-JIC either by keyboard combination ( make sure that you have used file with newer firmware than current phone firmware. If you don't know what firmware have ben in phone before software damage – just use latest zbin file from support!) 3. If phone go in ODIN mode, download firmware with same version as in ZBIN file e.g if you used 4. Samsung_GT-I9200_I9200XXUDNE4_GPT_UEFI.zbin you should use I9200XXUDNE4 firmware or newer one. 5. Flash phone with ODIN with PIT file! 6. Repair Done. Creating MAGIC CARD from BIN Dump Do step 1 and 2 same as above. Step 3 and 4. BR. Siddeque.