[Nizda Mobile]

Originally Posted by unlock in nepal

Z3X EasyJtag Software ver. 1.9.1.2
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 191911044D64DB2C, ,FW Ver.: 01.52
CMD Pullup Level:2052 mV
CMD Active Level:2629 mV
eMMC Device Information
EMMC CID : 1501003030303030305620110726589C
EMMC CSD : 902701320F5903FFF6DBFFEF8A404022
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2005 Rev.0x56
EMMC NAME: 000000 , S/N: 537986854
EMMC NAME (HEX): 30303030303000
EMMC ROM1 (Main User Data) Capacity: 16384 MB
EMMC ROM2 (Boot Partition 1) Capacity: 512 kB
EMMC ROM3 (Boot Partition 2) Capacity: 512 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: 000000_ 537986854_20150304_2118.extcsd
Done.


eMMC firmware update


Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVTU000LM-B503
Z3X EasyJtag Software ver. 1.9.1.2
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 191911044D64DB2C, ,FW Ver.: 01.52
CMD Pullup Level:2052 mV
CMD Active Level:2619 mV
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Success!
eMMC firmware is updated now!
Please reconnect all eMMC lines before next operation!
Please don't forget to repair extCSD from backup!
Please don't forget to configure BOOT sizes!
Done.

Rading ok


Z3X EasyJtag Software ver. 1.9.1.2
Skip loading eMMC Addon Firmware
CMD Pullup Level:2031 mV
CMD Active Level:2382 mV
Output file :C:\Documents and Settings\Narayanmobile\My Documents\EMMC_ROM1_00000000_20000000.bin
Reading 0x000020000000 bytes from 0x000000000000 ...ROM1 ( USER ROM)
Done. Read Speed: 637 kB/s


writing error


Input file : C:\Documents and Settings\Narayanmobile\Desktop\I9300 Fromsupport\EMMC_ROM1_00000000_20000000.bin
Writing 0020000000 bytes to 00000000 ...ROM1 (USER ROM)
Retry writing adress 0x00000000 (Attempt #1)...
Retry Success! Disabling Write Optimistations...
Retry writing adress 0x00003E00 (Attempt #1)...
Retry Success! Disabling Write Optimistations...
Retry writing adress 0x00007C00 (Attempt #1)...
Retry Success! Disabling Write Optimistations...
Retry writing adress 0x0000BA00 (Attempt #1)...
Retry Success! Disabling Write Optimistations...
Retry writing adress 0x0000F800 (Attempt #1)...
Retry Success! Disabling Write Optimistations...
Retry writing adress 0x00011E00 (Attempt #1)...
Retry Success! Disabling Write Optimistations...
Retry writing adress 0x00013E00 (Attempt #1)...
Retry Fail!
Retry writing adress 0x00013E00 (Attempt #2)...
Retry Fail!
Retry writing adress 0x00013E00 (Attempt #3)...
Retry Fail!
Write Block Failed, Reason: CARD Ready Timeout Error
Done.

Emmc info


eMMC Device Information
EMMC CID : 15010056545530304DFC3D39868641FA
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 04/2014 Rev.0xFC
EMMC NAME: VTU00M , S/N: 1027180166
EMMC NAME (HEX): 56545530304D00
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: VTU00M_1027180166_20150304_2149.extcsd
Done.

set boot partition............


BR
Nizda Mobile