huwawie 511-u00 dead revived by flashing Flash files count is :11
Action : Firmware update.
Selected Huawei: Ascend Y511-U00
Exe version: NCKBox AndroidMTK 1.8.5.4
Scenario: Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM40)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e4a5330304d
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 1501004E4A5330304D00663306A28069
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM (Android) (COM41)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN:0x2c740000 - LEN:0x17800000
FORMAT EMMC FLASH : BEGIN:0x43f40000 - LEN:0x52c00000
Send preloader...
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done. |