| Running:SAMSUNG: eMMC firmware update...
Confirmed eMMC Part Number: KMVYL000LM-B503
Z3X EasyJtag Software ver. 1.9.1.0
Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 05050C1F2A20426B, ,FW Ver.: 01.52
CMD Pullup Level:2670 mV
CMD Active Level:2753 mV
Setup firmware update mode, wait 2..30 sec...
Success!
Sending eMMC firmware...
Success!
Verifying eMMC firmware...
Success!
Flashing eMMC firmware...
Success!
Repairing eMMC CID...
Now Reconnect all eMMC Lines [POWER, CMD, CLK, DAT0]!
Do it until progress bar is moving (20 sec timeout)!
Can't init device, Reason: OCR Ready Timeout Error [Check VCC or eMMC DEAD]
Done. |