GSM-Forum - View Single Post - blu life xl read flash done [USER REPORT] ★★★★★

maxpatri9 · 05-31-2016, 22:51

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM189)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6592_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : PreLoader USB VCOM (Android) (COM190)
IMEI[1]: 356317072659418
IMEI[2]: 356317072762410
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing MBR
Reading: BEGIN: 0x0 - LEN: 0x200
Start procesing EBR1
Reading: BEGIN: 0x80000 - LEN: 0x200
[0]Start procesing proinfo
Reading: BEGIN: 0x100000 - LEN: 0x1000
Start procesing nvram
IMEI[1] from NVRAM: 356317072659418
IMEI[2] from NVRAM: 356317072762410
Start procesing PROTECT_F ......
Reading: BEGIN: 0x900000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x1300000 - LEN: 0xa00000
Start procesing UBOOT ......
Start processing BOOTIMG
Reading: BEGIN: 0x1da0000 - LEN: 0x633800
Start processing RECOVERY
Reading: BEGIN: 0x27a0000 - LEN: 0x706800
Start procesing secro
Start procesing LOGO ......
Start procesing EBR2
Reading: BEGIN: 0x4020000 - LEN: 0x200
Start procesing FRP ......
Reading: BEGIN: 0x40a0000 - LEN: 0x100000
Start procesing system
Reading: BEGIN: 0x5000000 - LEN: 0xc0000000
Backup CACHE disabled, we will skip it....
Backup USRDATA disabled, we will skip it....
Saved to : C:\Users\MAXX CELL\Documents\Android_MTK\firmware_backup\MT6592_ S00_EMMC_356317072659418_356317072762410_05_31_201 6_17_29_10
Wait untill phone will start charging.
All done.

05-31-2016, 22:51	#1 (permalink)
maxpatri9 No Life Poster Join Date: Apr 2015 Location: Dominican Republic Posts: 2,566 Member: 2382052 Status: Offline Thanks Meter: 1,512	blu life xl read flash done [USER REPORT] ★★★★★ Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM (Android) (COM189) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6592_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) HYNIX 0x483847316505 EMMC FW VERSION: 07:00:00:00:00:00:00:00 EMMC CID: 90014A48384731 : 000000000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2c00000 [7.293 GB] Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : PreLoader USB VCOM (Android) (COM190) IMEI[1]: 356317072659418 IMEI[2]: 356317072762410 Dumping Preloader. Start dumping flash, this can take up to 1 hour....... Start procesing MBR Reading: BEGIN: 0x0 - LEN: 0x200 Start procesing EBR1 Reading: BEGIN: 0x80000 - LEN: 0x200 [0]Start procesing proinfo Reading: BEGIN: 0x100000 - LEN: 0x1000 Start procesing nvram IMEI[1] from NVRAM: 356317072659418 IMEI[2] from NVRAM: 356317072762410 Start procesing PROTECT_F ...... Reading: BEGIN: 0x900000 - LEN: 0xa00000 Start procesing PROTECT_S ...... Reading: BEGIN: 0x1300000 - LEN: 0xa00000 Start procesing UBOOT ...... Start processing BOOTIMG Reading: BEGIN: 0x1da0000 - LEN: 0x633800 Start processing RECOVERY Reading: BEGIN: 0x27a0000 - LEN: 0x706800 Start procesing secro Start procesing LOGO ...... Start procesing EBR2 Reading: BEGIN: 0x4020000 - LEN: 0x200 Start procesing FRP ...... Reading: BEGIN: 0x40a0000 - LEN: 0x100000 Start procesing system Reading: BEGIN: 0x5000000 - LEN: 0xc0000000 Backup CACHE disabled, we will skip it.... Backup USRDATA disabled, we will skip it.... Saved to : C:\Users\MAXX CELL\Documents\Android_MTK\firmware_backup\MT6592_ S00_EMMC_356317072659418_356317072762410_05_31_201 6_17_29_10 Wait untill phone will start charging. All done.