View Single Post
Old 09-26-2016, 12:31   #36 (permalink)
Mumang
Freak Poster
 
Join Date: May 2009
Posts: 247
Member: 1038939
Status: Offline
Thanks Meter: 98
Problem solved - dump from alive phone and write to death,later post result in picture.
Log flashing -
Code:
    Disconnect Mobile...
    Re-Put the Mobile Bettery...
    Then Connect your Phone to Computer again....
    Please Make sure Mobile better has Power...
>>> Searching Mobile Port...
    Get Mobile Port is:  COM4
>>> Device driver identification: 
    MediaTek USB Port
>>> Mobile Has Connect...
    CPU_NAME: MT6755
>>> Reading Mobile Hardware Info...Success
    HW_Inf:  8A00    SW_Inf:  CB00
>>> Initialization Mobile ...
>>> Sending Auth File To Mobile...Success
>>>>Trying Connect to Service verification data...
Success
>>> Downloading Boot1 To Mobile Phone...Success
    Mobile phone status:SYNC...
    Mobile phone status swtich to :brom...Success
    Make sure Mobile status has in :brom...Success
    Init Mobile BOOT2 ...
    =====================Flash Type(eMMC)==============
    Flash   Size: 0x0000000747C00000 -> 29820M
    Flash     ID: 0x150100525831424D
    Flash   Name: Samsung_Unknow
    Flash symbol: RX1BMB
>>> Swich Mobile to Hight Speed Re\Wr Port...
    Get Mobile Port is:  COM9
>>> Device driver identification: 
    MediaTek DA USB VCOM (Android)
>>>>Flashing preloader Block data to Moblile Phone...
    Start: 0x0000000000    Size: 0x000002E7D0
>>>>Flashing recovery Block data to Moblile Phone...
    Start: 0x0000008000    Size: 0x0000C88E44
>>>>Flashing custom Block data to Moblile Phone...
    Start: 0x0001088000    Size: 0x0010000041
>>>>Flashing lk Block data to Moblile Phone...
    Start: 0x002C100000    Size: 0x00000586E4
>>>>Flashing lk2 Block data to Moblile Phone...
    Start: 0x002C200000    Size: 0x00000586E4
>>>>Flashing boot Block data to Moblile Phone...
    Start: 0x002C300000    Size: 0x00008E3E44
>>>>Flashing logo Block data to Moblile Phone...
    Start: 0x002D300000    Size: 0x00000845C4
>>>>Flashing secro Block data to Moblile Phone...
    Start: 0x002E500000    Size: 0x0000021000
>>>>Flashing system Block data to Moblile Phone...
    Start: 0x0030000000    Size: 0x00627CF69A
>>>>Flashing cache Block data to Moblile Phone...
    Start: 0x00D0000000    Size: 0x00008A0130
>>>>Flashing userdata Block data to Moblile Phone...
    Start: 0x00EB000000    Size: 0x000F95A5B0
    Corresponding operation completed!!!
    After Finish;Disconnect usb cable,keep hold the power key 10s more,mobile will reboot!!!
Firmware add in PM ARD and zhulianqi for testing.
 
 
Page generated in 0.12666 seconds with 6 queries