GSM-Forum - View Single Post - alcatel 5010G read code done [USER REPORT] ★★★★★

maxpatri9 · 10-26-2016, 18:29

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.0
Selected model: OT-5010G
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046373232 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM190)
OTP IMEI: 014629007180136
MODEL FROM PROINFO: 5010G-2TWCDO1
SECRO FROM PROINFO: X5E0NL03BS10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 2157625005968470
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

10-26-2016, 18:29	#1 (permalink)
maxpatri9 No Life Poster Join Date: Apr 2015 Location: Dominican Republic Posts: 2,563 Member: 2382052 Status: Offline Thanks Meter: 1,511	alcatel 5010G read code done [USER REPORT] ★★★★★ Selected connection metod: FLASH Mode Exe version: NCKDongle AndroidMTK 2.5.7.0 Selected model: OT-5010G Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM21) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6580_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 15010046373232 : 000000000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM (Android) (COM190) OTP IMEI: 014629007180136 MODEL FROM PROINFO: 5010G-2TWCDO1 SECRO FROM PROINFO: X5E0NL03BS10 Reading security, wait... SIM[1]: Block1(N): Locked (remain:10) Code : 2157625005968470 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Please note, some firmwares can display wrong codes. Some firmwares can be hardlocked. If this happen, perform direct unlock. If direct unlock fail,use reset package from support. If reset package not exist in support,request help in forum. Wait untill phone will start charging. All done.