done thanks umt team
Operation : Flash
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM146)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Connecting to phone... OK
Waiting for response... OK
Init Handshake Sequence... OK
Hardware ID : E1809100 [8x10] [00000000]
Initializing Protocol... OK
Preparing Firehose Loader... Done
Sending Firehose Loader... Done
Executing Loader... OK
Hardware : 8x10, eMMC, 8 GB
Warning! High Speed Driver not installed.
Please install driver from QcFire\Drivers folder.
Payload Info : In: 65536 [4096], Out: 49152, Sector Size: 512
Writing sbl1.mbn ... Done
Writing sbl1.mbn ... Done
Writing rpm.mbn ... Done
Writing rpm.mbn ... Done
Writing tz.mbn ... Done
Writing tz.mbn ... Done
Writing sdi.mbn ... Done
Writing emmc_appsboot.mbn ... Done
Writing emmc_appsboot.mbn ... Done
Writing dummy.img ... Done
Writing dummy.img ... Done
Writing NON-HLOS.bin ... Done
Writing boot.img ... Done
Writing recovery.img ... Done
Writing system.img ... Done
Writing cache.img ... Done
Writing userdata.img ... Done
Writing gpt_main0.bin ... Done
Writing gpt_backup0.bin ... Done
Applying Patches... Done
Resetting device... Done
Operation Finished.
Last edited by U.M.T; 01-20-2017 at 09:41.
Reason: Removed link to other section
|