GSM-Forum - View Single Post - Alcatel 5045a read flash and unlock done [USER REPORT] ★★★★★

maxpatri9 · 02-02-2017, 18:29

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.7.3
Selected model: OT-5045A
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM850)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM190)
OTP IMEI: 014603004555624
MODEL FROM PROINFO: 5045A-2AAVDO3
SECRO FROM PROINFO: X7E0NK00BP10
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 7586865472889026
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM850)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM190)
Build ID: MRA58K
Display ID: MRA58K release-keys
Version: 6.0
Build Date: Wed Nov 9 00:52:34 CST 2016
Build Date: 1478623954
Model: 5045A
Brand: TCL
Device: PIXI4_5_4G
Manufacturer: TCL
Mediatek Version Release: alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P91
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
Region: MX

OTP IMEI: 014603004555624
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing proinfo
Reading: BEGIN: 0x800000 - LEN: 0x1000
Start procesing nvram
Start procesing protect1 ......
Reading: BEGIN: 0x1000000 - LEN: 0xa00000
Start procesing protect2 ......
Reading: BEGIN: 0x1a00000 - LEN: 0xa00000
Start procesing mobile_info
Reading: BEGIN: 0x2400000 - LEN: 0x800000
Start procesing simlock ......
Reading: BEGIN: 0x2c00000 - LEN: 0x800000
Start procesing lk ......
Start processing boot
Start processing recovery
Start procesing logo ......
Start procesing secro
Start procesing tee1
Start procesing tee2
Start procesing frp ......
Reading: BEGIN: 0xa000000 - LEN: 0x800000
Start procesing nvdata ......
Reading: BEGIN: 0xa800000 - LEN: 0x2000000
Start procesing system
Reading: BEGIN: 0xe800000 - LEN: 0x90000000
Backup cache disabled, we will skip it....
Backup userdata disabled, we will skip it....
Saved to : C:\Users\MAXX CELL\Documents\Android_MTK\firmware_backup\MT6735M _S00_EMMC_MRA58K__6.0_5045A_TCL_014603004555624_02 _02_2017_13_17_00
Wait untill phone will start charging.
All done.

02-02-2017, 18:29	#1 (permalink)
maxpatri9 No Life Poster Join Date: Apr 2015 Location: Dominican Republic Posts: 2,563 Member: 2382052 Status: Offline Thanks Meter: 1,511	Alcatel 5045a read flash and unlock done [USER REPORT] ★★★★★ Selected connection metod: FLASH Mode Exe version: NCKDongle AndroidMTK 2.5.7.3 Selected model: OT-5045A Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM850) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6735M_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b EMMC FW VERSION: 12:00:00:00:00:00:00:00 EMMC CID: FE014E50314A39 : 000000000000000000 EMMC UA SIZE: 0x1d3000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d3600000 [7.303 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM (Android) (COM190) OTP IMEI: 014603004555624 MODEL FROM PROINFO: 5045A-2AAVDO3 SECRO FROM PROINFO: X7E0NK00BP10 Reading security, wait... SIM[1]: Block1(N): Locked (remain:5) Code : 7586865472889026 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Please note, some firmwares can display wrong codes. Some firmwares can be hardlocked. If this happen, perform direct unlock. If direct unlock fail,use reset package from support. If reset package not exist in support,request help in forum. Wait untill phone will start charging. All done. Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM850) Boot mode: Preloader Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6735M_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 1 GB DRAM ---------------------------------------------------- EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b EMMC FW VERSION: 12:00:00:00:00:00:00:00 EMMC CID: FE014E50314A39 : 000000000000000000 EMMC UA SIZE: 0x1d3000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d3600000 [7.303 GB] Preloader SEC version: 2 Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM (Android) (COM190) Build ID: MRA58K Display ID: MRA58K release-keys Version: 6.0 Build Date: Wed Nov 9 00:52:34 CST 2016 Build Date: 1478623954 Model: 5045A Brand: TCL Device: PIXI4_5_4G Manufacturer: TCL Mediatek Version Release: alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P91 FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp Region: MX OTP IMEI: 014603004555624 Dumping Preloader. Start dumping flash, this can take up to 1 hour....... Start procesing proinfo Reading: BEGIN: 0x800000 - LEN: 0x1000 Start procesing nvram Start procesing protect1 ...... Reading: BEGIN: 0x1000000 - LEN: 0xa00000 Start procesing protect2 ...... Reading: BEGIN: 0x1a00000 - LEN: 0xa00000 Start procesing mobile_info Reading: BEGIN: 0x2400000 - LEN: 0x800000 Start procesing simlock ...... Reading: BEGIN: 0x2c00000 - LEN: 0x800000 Start procesing lk ...... Start processing boot Start processing recovery Start procesing logo ...... Start procesing secro Start procesing tee1 Start procesing tee2 Start procesing frp ...... Reading: BEGIN: 0xa000000 - LEN: 0x800000 Start procesing nvdata ...... Reading: BEGIN: 0xa800000 - LEN: 0x2000000 Start procesing system Reading: BEGIN: 0xe800000 - LEN: 0x90000000 Backup cache disabled, we will skip it.... Backup userdata disabled, we will skip it.... Saved to : C:\Users\MAXX CELL\Documents\Android_MTK\firmware_backup\MT6735M _S00_EMMC_MRA58K__6.0_5045A_TCL_014603004555624_02 _02_2017_13_17_00 Wait untill phone will start charging. All done.