| Lenovo A2010-a succesfully unlocked with nck-box
Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.7
Selected model: A2010a
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010046373232 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM10)
IMEI[1]: 8690760274xxxxx
IMEI[2]: 8690760275xxxxx
Reading security, wait...
Block1(N): Locked (remain:5) Code : 86626331
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Block1(N): Unlocked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
ALGO[1]
Unlock finished.
Wait untill phone will start charging.
All done. |