| g925f failed with MSL
-----------------------------------------------------
Download: Press Vol Dn + Home + Power
UART Cable Resistor: 523 K
ReadCodes/Unlock/Repair:
Cables: MicroUART
Interface: Auto, Change UART when request
Read Info/Flashing/UserLock/Backup:
Cables: MicroUSB
Interface: Auto
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model: SM-G925F
Hardware: SAMSUNGEXYNOS7420
Mode: normal
Detect 1 USB devices not install driver
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.
Device Info (MTP)
Model: SM-G925F
IMEI: 350000000000006
PDA Version: G925FXXU3DPAD
Phone Version:
CSC : G925FOXA3DPAD
CSC Version: G925FXXU3DPAD
SerialNumber:
Time used : 40.1 s
Checking DRK ... Invalid data
Repairing DRK ... failed
Connect to device ...
Device Authentication ... communication failed
Please check:
1. choose the right port
2. some device UART need re-connect use each 30 seconds
Connect to device ...
Device Authentication ... communication failed
Please check:
1. choose the right port
2. some device UART need re-connect use each 30 seconds
Prepare environment ... check environment failed
Time used : 12.1 s
Reboot device to DOWNLOAD mode ...
Wait device ready ...
Connect to device ...
Repair EFS ...
Flash completed
Time used : 2.0 s
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.
This operation need MTP interface, if you are connect device via UART cable, replace with USB cable and re-scan device.
Restarting ADB service ... ok
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model: SM-G925F
Hardware: SAMSUNGEXYNOS7420
Mode: normal
Detect 1 USB devices not install driver
Connect to device ...
Device Authentication ... failed with MSL
Checking DRK ... Invalid data
Repairing DRK ... failed
Connect to device ...
Device Authentication ... failed with MSL
Connect to device ...
Device Authentication ... failed with MSL
Checking DRK ... Invalid data
Repairing DRK ... failed
Prepare environment ...
Enabling UART ... ok
Connect to device ...
Device Authentication ... failed with MSL
Checking DRK ... Invalid data
Repairing DRK ...
Checking DRK ... Invalid data
Checking DRK ... Invalid data
Repairing DRK ...
Checking DRK ... Invalid data
Connect to device ...
Device Authentication ... failed with MSL
Connect to device ... communication failed
Connect to device ...
Device Authentication ... failed with MSL
Prepare environment ... Device do not have ADB interface, turn on device USB DEBUG and connect with usb cable,then re-scan device
Need reboot device to normal
Time used : 0.0 s
Scanning devices ... 1 found
dev[1]
Manufactory: SAMSUNG
Model: SM-G925F
Hardware: SAMSUNGEXYNOS7420
Mode: normal
Detect 1 USB devices not install driver
Prepare environment ...
Backup EFS ... D:\BST\backup\samsung\efs\SM-G925F\EFS_samsung_SM-G925F__2017-05-03_15.46.41.efs ok
Wiping EFS ... ok
Time used : 23.4 s
Checking DRK ... Invalid data
Repairing DRK ...
Checking DRK ... Invalid data
Connect to device ...
Device Authentication ... failed with MSL
Connect to device ...
Device Authentication ... failed with MSL
Connect to device ...
Device Authentication ... failed with MSL
Reboot device to DOWNLOAD mode ...
Wait device ready ... can't wait a UART connected device boot ready. |