View Single Post
Old 06-20-2017, 18:08   #7 (permalink)
cellncare
Freak Poster
 
Join Date: Dec 2005
Age: 47
Posts: 240
Member: 205157
Status: Offline
Sonork: 100.1574537
Thanks Meter: 82
XT1643 Pattern And FRP DONE Ver 7.0 With Great Tool

Operation : Identify [ v1.0 ]
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Main Info ============
CPU : MSM8952
CID : 0x0032
IMEI : 3581XXXXXXXXX76
UID : 721D930000000000000000000000

Model Info ============
DevModel : XT1643
IntName : athene_16mp

SW Info ============
DevSWVer : Blur_Version.25.11.16.athene.retail.en.US
DevQCVer : LA.BR.1.3.6-01710-8976.0
BaseBand : M8952_70030.25.03.62R ATHENE_INDIA_DSDS_CUST
BootLDRv : moto-msm8952-B1.03

HW Info ============
eMMCInfo : 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
DRAMInfo : 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B

Lock Info ============
WarrantyVoid : no
FRP Lock : protected (75)

Done!
Elapsed: 00:00:04

Operation : Enable ADB (Moto) [ v1.0 ]
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Device not found! Check cable, drivers and conection!
Operation : Enable ADB (Moto) [ v1.0 ]
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : XT1643
VerInfo : ATHENE_INDIA_DSDS_CUST
Version : Blur_Version.25.11.16.athene.retail.en.US
Enabling ADB ...

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:12


Operation : Reset FRP (ADB) [ v1.0 ]
Waiting for device in ADB mode ...
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Device : athene_f
Model : Moto G (4)
FRP reset passed! Make FACTORY RESET from menu!

Done!
Elapsed: 00:00:10
  Reply With Quote
The Following 5 Users Say Thank You to cellncare For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.09142 seconds with 8 queries