Chinese Miracle II [SPD module] v 1.27
Set mode to : SP [SC983x] eMMC [Generic Android 7.x]
Operation : Flash Erase [ v1.27 ]
Code:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 47 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Erasig flash now, please wait ...
Format finished! Reflash phone with normal FW now!
Elapsed: 00:00:41
Reconnect Power/Cable!
Operation : Flash [ v1.27 ]
Code:
Loading : SP983X_6.0-20170221-1845.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SharkLSGLobalMarlinAndroid5.1
PacVersion : SP983X_6.0-20170221-1845
FastCheck : 0x009813A566
Loading files ...
File : fdl1.bin
File : fdl2.bin
File : ltenvitem.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : ltemodem.bin
File : ltedsp.bin
File : ltegdsp.bin
File : ltewarm.bin
File : pmsys.bin
File : wcnfdl.bin
File : wcnmodem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo.bmp
File : logo.bmp
File : cache.img
File : persist.img
File : sysinfo.img
File : u-boot.bin
File : SharkLSGLobalMarlinAndroid5.1.xml
Load Ok!
Operation : Flash [ v1.27 ]
======= Flash
Files set for flashing :
[ MCU ] : SP983X_6.0-20170221-1845.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SharkLSGLobalMarlinAndroid5.1
PacVersion : SP983X_6.0-20170221-1845
File : fdl1.bin
File : fdl2.bin
File : ltenvitem.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : ltemodem.bin
File : ltedsp.bin
File : ltegdsp.bin
File : ltewarm.bin
File : pmsys.bin
File : wcnfdl.bin
File : wcnmodem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo.bmp
File : logo.bmp
File : cache.img
File : persist.img
File : sysinfo.img
File : u-boot.bin
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 47 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
PMTManager : Load 0x26 records
PMTManager : PMT Update Ok!
Flashing now
[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_WLTE
Current File : ltemodem.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : DSP_WLTE_LTE
Current File : ltedsp.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : DSP_WLTE_GGE
Current File : ltegdsp.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : WARM_WLTE
Current File : ltewarm.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : DFS
Current File : pmsys.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : FDL_WCN
Current File : wcnfdl.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : wcnmodem.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo.bmp
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : FASTBOOT_LOGO
Current File : logo.bmp
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : FLASH_WLTE
Current Part : l_runtimenv1
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : PERSIST
Current File : persist.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : SYSINFO
Current File : sysinfo.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!
Elapsed: 00:04:07
Reconnect Power/Cable!
handset working now thanks for Infinity Box Support Team