View Single Post
Old 07-14-2017, 13:35   #138 (permalink)
Akhtar Ali Jatt
No Life Poster
 
Akhtar Ali Jatt's Avatar
 
Join Date: Jan 2009
Location: Sindh Pakistan
Posts: 8,890
Member: 953334
Status: Offline
Sonork: 100.1614005
Thanks Meter: 15,430
Smile Nokia X2-02

Code:
Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm872__04.52.mcusw
PPM : rm872__04.52.ppm_m2
CNT : rm872__04.52.image_m2_059Q8L5
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.53_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Detected wrong image! Stop killing phone!!!!

Connect phone on selected interface...


Core : v2.29 , BB5XG FlashEngine : v10.5

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm694__11.84.mcusw
PPM : rm694__11.84.ppm_m_a
CNT : rm694__11.84.image_m_a_059D1B3
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...

-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---

Connection opened successfully

IF Boot Init : 0xF0
IF Resp Len  : 0x0A
IF xCPUID    : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data  :  1FB300020303010100FF

Sending EBL Loader ... 
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ... 
EBL sent Ok
EBL : Quantum_Bootloader_10.46_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!

Check keys...
Check done. Image can be flashed

Backup enabled, will read all certificates

Reading CCC
Reading HWC
Reading NPC

IMEI 1 : 352441058625468
IMEI 2 : 352441058625476
PCcode : 059P1W7

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...

RPL saved : C:\InfinityBox\BEST\Backup\Cert\352441058625468_XG213_CRT.rpl

Settings : EDM [0x8] , Block Mode , Fast CRC , Verify

   ===Flashing [MCU]===
File : rm694__11.84.mcusw
Image : rm694__11.84.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ... 
Erase done, time : 00:00:00 
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ... 
Erase done, time : 00:00:02 
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01980000
Erasing, wait ... 
Erase done, time : 00:00:52 
Write , Start : 0x40280000 , Len : 0x01900000
Flashing , wait ...
Region flash done, time : 00:00:41
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ... 
Erase done, time : 00:00:00 
No write data, skip
CRC check passed , 0xB615

   ===Flashing [PPM]===
File : rm694__11.84.ppm_m_a
Image : package_m_a.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00700000
Erasing, wait ... 
Erase done, time : 00:00:12 
Write , Start : 0x41C00000 , Len : 0x00440340
Flashing , wait ...
Region flash done, time : 00:00:05
CRC check passed , 0x40FC

   ===Flashing [CNT]===
File : rm694__11.84.image_m_a_059D1B3
Image : package_m_a_059D1B3.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42300000 , Len : 0x01B20000
Erasing, wait ... 
Erase done, time : 00:01:05 
Write , Start : 0x42300000 , Len : 0x00DC0000
Flashing , wait ...
Region flash done, time : 00:00:18
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done, time : 00:00:02 
No write data, skip
CRC check passed , 0x1F63

Flashing done!
Total flash time : 00:03:23
Reboot phone now...

Reading Phone Info....
Connected phone -   X2-02
Software Info:     V 11.84 13-09-12 RM-694 (c) Nokia            
IMEI:  352441058625468
PPM version :   V 11.84 13-09-12 RM-694 (c) Nokia             M_A
Product code:  059H398
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 43 certs
Certificates found, skip upload ...
===== WARNING =====
Battery voltage is can be not enough for start
===== WARNING =====
AfterFlash operations done ;D
Done!
Connect phone on selected interface...


Elapsed: 00:04:11
Connect phone on selected interface...
  Reply With Quote
The Following 4 Users Say Thank You to Akhtar Ali Jatt For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.08514 seconds with 7 queries