Quote:
Originally Posted by royalnasim Use 1.8v 2.8v external power and post result |
ompression is ON
Z3X EasyJtag Software ver. 2.6.0.1
Loading eMMC GEN1 Firmware... IO: 1850 mV
Box S/N: xxxxxxxxxxx, ,FW Ver.: 01.60
CMD Pullup Level:350 mV
CMD Active Level:1557 mV
Box IO Level:1850 mV
CLK Rate:14000 khz
HiPower mode is off!
Can't init device, Reason: CMD Timeout Error
Done.