How To Flash/Repair Huawei Phones
[*For All Operations, you need to select HUAWEI CDMA Handset - Application Interface Port.]
[Please check Device Manager to confirm assigned Port Number.]
[You can select Maximum Baud Rate for these phones.] To Fix "Phone Locked, Contact Service Center"
- Connect phone in Normal Mode.
- Make sure there is no RUIM in Phone
- Start NCK CDMA, Goto Huawei Page.
- Select any Huawei Model.
- Select Correct Port*.
- Click on
Fix CS, and you are done.
To Fix "fs.pm error", "phone turn off when calling/after few seconds" or other FileSystem related problem:
- Connect phone in Emergency Mode (
5 + PWR or
5 + USB).
- Start NCK CDMA, Goto Huawei Page.
- Select Correct Huawei Model (Important).
- Select Correct Port*.
- Tick
EFS Checkbox, File selection button will be enabled.
- Click on
[..] button and select
.MBN or
.BIN file (Change Files of Type accordingly in Open File Dialog).
- Click on
Write and you are done.
To Erase EFS:
- Connect phone in Emergency Mode (
5 + PWR or
5 + USB).
- Start NCK CDMA, Goto Huawei Page.
- Select Correct Huawei Model (Important).
- Select Correct Port*.
- Click on
Erase EFS and you are done.
To Completely Flash The Phone:
- Connect phone in Emergency Mode (
5 + PWR or
5 + USB).
- Start NCK CDMA, Goto Huawei Page.
- Select Correct Huawei Model (Important).
- Select Correct Port*.
- Tick
APP Checkbox, File selection button will be enabled.
- Click on
[..] button and select
.MBN or
.BIN file (Change Files of Type accordingly in Open File Dialog).
- Tick
EFS Checkbox, File selection button will be enabled.
- Click on
[..] button and select
.MBN or
.BIN file (Change Files of Type accordingly in Open File Dialog).
- Click on
Write and you are done.
Enjoy the Smartest, Safest and Fastest CDMA Tool!