Quote:
Originally Posted by heartcrusted  Initialising: SAMSUNG GT-I8160 Config ver.:1.01
I/O Level set to : 2600 mV
Box S/N: 15005005299AC5A8 ,FW Ver.: 01.62
Connecting to Target...
U8500 USB BOOTROM : device 04CC:8500 opened
success: set configuration #1
success: claim_interface #0
Sending XLOADER...
success: bulk read 4 bytes
Done.
JTAG device: U8500
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
JTAG device: U8500
CPU IDCODE : 0x62286041 Mfg.: 0x020, Part: 0x2286, Ver.: 0x6
CPU Manufacturer: SGS/Thomson , CPU Name: NOVATHOR U8500 JRC
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
Timeout Error while reading approx : 0x00000008 bytes over DCC
ERROR: No loader answer
DCC Loader init Failed!
BUG: emmc unknown controller initialization failure
need reply help me blang what is that problem ph is dead |
Hello , this error mean that loader cannot detect eMMC at all. Try to replace it or connect via ISP mode. JTAG cannot diagnose total dead eMMC cases.