View Single Post
Old 01-04-2018, 16:04   #68 (permalink)
Junior Member
Join Date: Jan 2015
Posts: 25
Member: 2326487
Status: Offline
Thanks Meter: 8
Samsung S7 SM-G930 FRP Reset successfully done

Welcome to Octoplus FRP Tool v.1.0.7
Platform: SAMSUNG
Selected model: SM-G930F
To put SM-G930F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
PIT was read successfully.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.0.7 Software version.

Last edited by Octopus box; 01-04-2018 at 20:39.
  Reply With Quote
The Following User Says Thank You to mediafon For This Useful Post:
Page generated in 0.05958 seconds with 7 queries