GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

Smart144 · 02-27-2018, 11:46

Platform: MOTOROLA
Selected model: XT1540
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: EAAAANVZ
Firmware released date: Jan 12 2016
Firmware released time: 03:09:45
Firmware compiled date: Nov 22 2015
Firmware compiled time: 23:00:00
SW version: MPSS.DPM.2.0.2.c1.8-00044-M8936FAAAANUZM-1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola MotoG3
SW version: MPIS24.107-55-2-12
Date: Mon Jan 16 04:04:01 CST 2017
Android version: 6.0.1
Baseband M8916_2020632.44.03.21.54R OSPREY_EMEA_CUST
Detected phone model: XT1541
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.5 Software version.

02-27-2018, 11:46	#254 (permalink)
Smart144 Freak Poster Join Date: Oct 2014 Location: Ukraine, Poland Age: 34 Posts: 101 Member: 2273856 Status: Offline Thanks Meter: 61	Motorola XT1540 FRP lock is successfully reseted! Platform: MOTOROLA Selected model: XT1540 Put the phone into Factory Mode: 1. Power phone OFF; 2. Press and hold "Vol-" + "Power" buttons; 3. Select Factory Mode, then confirm your selection; 4. Wait until the phone Power ON; 5. Connect USB cable. Searching for a phone. Please wait... Phone found. Reading info... Phone model: EAAAANVZ Firmware released date: Jan 12 2016 Firmware released time: 03:09:45 Firmware compiled date: Nov 22 2015 Firmware compiled time: 23:00:00 SW version: MPSS.DPM.2.0.2.c1.8-00044-M8936FAAAANUZM-1 Enabling "USB Debugging" mode... Put the phone in Factory Mode: 1. Disconnect USB cable; 2. Power OFF the phone; 3. Press "Vol-" and "Power" buttons; 4. Select Factory Mode then confirm your selection; 5. Wait until phone is power ON and connect USB Cable; 6. Install necesarry drivers then press "OK" button Please, press "OK" button on the phone to allow USB debugging.. Searching for a phone (waiting for ADB device)... Phone found. Reading info... Phone model: motorola MotoG3 SW version: MPIS24.107-55-2-12 Date: Mon Jan 16 04:04:01 CST 2017 Android version: 6.0.1 Baseband M8916_2020632.44.03.21.54R OSPREY_EMEA_CUST Detected phone model: XT1541 Resetting FRP lock.. FRP lock is successfully reseted! Performed by 1.1.5 Software version.