View Single Post
Old 03-01-2018, 13:59   #265 (permalink)
Insane Poster
Join Date: Jun 2006
Posts: 76
Member: 286742
Status: Offline
Thanks Meter: 34
Reset FRP Motorola XT1671 using Motorola XT1670.

Platform: MOTOROLA
Selected model: XT1670
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Mar 22 2017
Firmware released time: 21:15:58
Firmware compiled date: Mar 13 2017
Firmware compiled time: 23:00:00
SW version: MPSS.JO.2.0.c1.8-00016-8937_GENNS_PACK-1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPPS25.137-76-3
Date: Fri Aug 4 06:06:02 CDT 2017
Android version: 7.0
Baseband M8937_11.16.02.51R CEDRIC_LATAMDSDS_CUST
Detected phone model: XT1671
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.5 Software version.
  Reply With Quote
The Following User Says Thank You to leandro_grilo For This Useful Post:
Page generated in 0.06135 seconds with 7 queries