View Single Post
Old 04-02-2018, 13:11   #167 (permalink)
rolly810925
Freak Poster
 
Join Date: May 2009
Posts: 121
Member: 1042338
Status: Offline
Thanks Meter: 8
hi all
i need read a user data from a chip 221 bun is impossibile
i have check all the possibbilities and the erro is the same , can somebodu explaim me how work tha easy jtag box? i have easy jtag plus with all adapters (i think)
eMMC_tool Suite ver. 1.4.9.0 (release date: 12.12.2017)
Microsoft Windows 7 (32 bit) build 7601 (6.1.7601.18015)

Looking for EasyJTAG box...
EasyJTAG API ver. 2022
EasyJTAG Box Serial = 42062D43********
Card Serial = AAAA-****
EasyJTAG Box Firmware = 2.21

Changelog:

12.12.2017 (ver 1.4.9.0)
Fix: Bugs that have been found through your crash report
Fix: RandomVerify function
Fix: Creation of GPT for Samsung (write by vendor)
Fix: Failed to mount large Fat partitions (explorer)
Fix: Extraction from contact2.db (explorer)
Fix: Error in the "build.prop" parser
Fix: CID Parser
Add: Support for EasyJtag Plus Box
Add: Path for TempDir and InitialDir (option in settings)
Add: Unpack Lenovo QSB (utilities)
Add: Selecting a PIT file from CSC (write by vendor Samsung)
Add: Detect for encrypted dumps from GPG Box
Add: Detect for FullDiskEncryption Partition (explorer)
Add: LinearVerify of the Partition (read by vendor)
Add: Information base about emmc compatibility (thanks to phonemicrodb)
Add: Resizing the window (for small screen resolutions)
Add: Converting large partitions in SparseImage when reading by vendor (option in settings)
Add: Mounting SparseImage (explorer)
Add: Automatic backup of the EFS partition for Samsung (read by vendor)
Add: Formatting of EFS partition for Samsung on request (write by vendor)

Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 1735 mV
CMD Active Level: 2788 mV
Can't init device. Reason: CMD Timeout Error

Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 1735 mV
CMD Active Level: 2788 mV
Can't init device. Reason: CMD Timeout Error

Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 1800 mV
CMD Active Level: 3272 mV
Can't init device. Reason: CMD Timeout Error

Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 1799 mV
CMD Active Level: 3271 mV
Can't init device. Reason: CMD Timeout Error

Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 1517 mV
CMD Active Level: 1877 mV
Can't init device. Reason: CMD Timeout Error

Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 559 mV
CMD Active Level: 1862 mV
Can't init device. Reason: CMD Timeout Error

Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 1071 mV
CMD Active Level: 1868 mV
Can't init device. Reason: CMD Timeout Error
  Reply With Quote
 
Page generated in 0.09107 seconds with 7 queries