GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

wahiditunes · 04-16-2018, 16:04

Welcome to Octoplus FRP Tool v.1.2.2
Platform: SAMSUNG
Selected model: SM-G935F
To put SM-G935F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface..
Found more then one box connected to COM3 COM3
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.2.2.0 Software version.

04-16-2018, 16:04	#528 (permalink)
wahiditunes Freak Poster Join Date: Jun 2017 Location: SAUDI ARABIA RIYADH Posts: 358 Member: 2725078 Status: Offline Sonork: 1680162 Thanks Meter: 173	Samsung SM-G935F Reset FRP Successfully done Welcome to Octoplus FRP Tool v.1.2.2 Platform: SAMSUNG Selected model: SM-G935F To put SM-G935F into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. Found more then one box connected to COM3 COM3 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.2.2.0 Software version. Last edited by Octopus box; 04-16-2018 at 18:23.