| Samsung SM-G930F S7 Reset FRP successfully done
SAMSUNG G930F S7 FRP REMOVE SUCESS:
*************************************
LOG BELOW
___________________________________
INFO : 5/17/2018 9:20:21 PM > Platform: SAMSUNG
INFO : 5/17/2018 9:20:21 PM > Selected model: SM-G930F
WARN : 5/17/2018 9:20:21 PM > To put SM-G930F into Download Mode, You have to perform the following steps:
WARN : 5/17/2018 9:20:21 PM > 1. Reconnect the battery.
WARN : 5/17/2018 9:20:21 PM > 2. Press and hold "Volume-" + "Home" + "Power ON" keys.
WARN : 5/17/2018 9:20:21 PM > 3. When phone turns on, press "Volume+" key.
INFO : 5/17/2018 9:20:21 PM > Searching for a phone. Please wait...
INFO : 5/17/2018 9:23:52 PM > Phone found.
INFO : 5/17/2018 9:23:52 PM > Initializing..
INFO : 5/17/2018 9:23:52 PM > PIT was read successfully.
INFO : 5/17/2018 9:23:53 PM > Searching for UART interface..
INFO : 5/17/2018 9:23:53 PM > COM28
WARN : 5/17/2018 9:23:56 PM > Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
INFO : 5/17/2018 9:23:56 PM > Searching for device. Please wait...
INFO : 5/17/2018 9:27:38 PM > Resetting FRP lock..
WARN : 5/17/2018 9:27:38 PM > FRP lock is successfully reseted!
BINF : 5/17/2018 9:27:38 PM > Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
INFO : 5/17/2018 9:27:45 PM > Performed by 1.2.6.3 Software version.
__________________________________________________ _________________
Last edited by Octopus box; 05-18-2018 at 04:47.
|