 🐙 Motorola Moto G (5S) Plus XT1804 FRP lock is successfully reseted {SUCCESS}
Platform: MOTOROLA
Selected model: XT1806
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8953.gen
Firmware released date: Aug 17 2017
Firmware released time: 03:07:51
Firmware compiled date: Aug 11 2017
Firmware compiled time: 03:00:00
SW version: MPSS.TA.2.3.c5-00036-8953_GEN_PACK-1.110485.2.111488.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5S) Plus
SW version: NPSS26.116-61-5
Date: Thu Mar 1 08:41:31 CST 2018
Android version: 7.1.1
Baseband M8953_27.36.07.41R SANDERS_INDIADSDS_CUST
Detected phone model: XT1804
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.2.8.0 Software version.
Last edited by Octopus box; 05-29-2018 at 13:03.
|