GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

pintu_das · 06-11-2018, 11:14

Samsung Galaxy S7 Duos SM-G930FD FRP remove done with Micro UART cable (with 525K resistor)

To put SM-G930FD into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.

Welcome to Octoplus FRP Tool v.1.3.0.0
Platform: SAMSUNG
Selected model: SM-G930FD
To put SM-G930FD into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM83
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.3.0.0 Software version.

Thanks Octopus team

06-11-2018, 11:14	#821 (permalink)
pintu_das No Life Poster Join Date: Jan 2015 Location: Narsingdi, Dhaka, Bangladesh Age: 28 Posts: 2,207 Member: 2325851 Status: Offline Sonork: 100.1680491 Thanks Meter: 2,363	🐙 Samsung Galaxy S7 Duos SM-G930FD FRP remove done with Micro UART cable (with 525K Samsung Galaxy S7 Duos SM-G930FD FRP remove done with Micro UART cable (with 525K resistor) To put SM-G930FD into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Welcome to Octoplus FRP Tool v.1.3.0.0 Platform: SAMSUNG Selected model: SM-G930FD To put SM-G930FD into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM83 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.3.0.0 Software version. Thanks Octopus team Last edited by Octopus box; 06-11-2018 at 12:16.