GSM-Forum - View Single Post - 🐙 Post here success Reset FRP story with Octoplus FRP Tool

wsmobile · 06-20-2018, 10:30

SM-G928G U4 Reset FRP successfully done

Welcome to Octoplus FRP Tool v.1.3.1.0
Platform: SAMSUNG
Selected model: SM-G928G
To put SM-G928G into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM55
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.3.1.0 Software version.

06-20-2018, 10:30	#888 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,107 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 386	SM-G928G U4 Reset FRP successfully done SM-G928G U4 Reset FRP successfully done Welcome to Octoplus FRP Tool v.1.3.1.0 Platform: SAMSUNG Selected model: SM-G928G To put SM-G928G into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Searching for a phone. Please wait... Phone found. Initializing.. PIT was read successfully. Searching for UART interface.. COM55 Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds Searching for device. Please wait... Resetting FRP lock.. FRP lock is successfully reseted! Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset" Performed by 1.3.1.0 Software version. Last edited by Octopus box; 06-20-2018 at 10:35.