View Single Post
Old 07-06-2018, 15:14   #1004 (permalink)
leandro_grilo
Insane Poster
 
Join Date: Jun 2006
Posts: 76
Member: 286742
Status: Offline
Thanks Meter: 34
Thumbs up Reset FRP XT1672 done

Reset FRP XT1672 using XT1585

I tried the right model and it did not work

*fail*

Platform: MOTOROLA
Selected model: XT1672
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone not responding!
Operation was failed!
Performed by 1.2.6.3 Software version.

Android security pach level of the unlocked model May 01,2018


*successful*

Platform: MOTOROLA
Selected model: XT1585
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Apr 9 2018
Firmware released time: 08:33:53
Firmware compiled date: Apr 06 2018
Firmware compiled time: 22:00:00
SW version: MPSS.JO.2.0.c1.8-00029-8937_GENNS_PACK-1.124223.1.144364.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Searching for a phone (waiting for ADB device)...
ADB server killed.
Please, press "OK" button on the phone to allow USB debugging..
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPPS25.137-93-2-3
Date: Wed May 2 05:14:11 CDT 2018
Android version: 7.0
Baseband M8937_22.29.02.56.01R CEDRIC_BRAZILDSDS_CUST
Detected phone model: XT1672
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.2.6.3 Software version.

Last edited by Octopus box; 07-06-2018 at 16:09.
  Reply With Quote
The Following User Says Thank You to leandro_grilo For This Useful Post:
 
Page generated in 0.06851 seconds with 7 queries