| Freak Poster
Join Date: Sep 2015
Posts: 160
Member: 2463805
Status: Offline Thanks Meter: 32 | SM-G532G dead tried many BL
got a SM G532G dead device by flashed wrong firmware.
I tried write by vendor with many BL versions
BL_G532GDXU1AQA4
BL_G532GDXU1APJ7
BL_G532GDDU1APK9
but the phone doesn't boot up. show's this error" Check BOOT_PARTITION_EN for the selected vendor"
then I did format the EMMC and Write the DUMP unfortunately the support dump doesn't has the boot2.now i need the dump to repair the boot.
can any one please upload dum with boot 1,2 and rom1.
here the logs
Detect Code: Setting frequence to 21 Mhz
CMD Pullup Level: 1629 mV
CMD Active Level: 1753 mV
EMMC Device Information :
EMMC CID: 90014A4838473475920104D674741530
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 04D67474 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: H8G4u_04D67474_20180901_074554.extcsd
EMMC Init completed.
Scanning soft partitions
GPT header is found and is valid
Partition: bota0, [000000400000 - 000000800000], size: 000000400000 (4.00 MB)
Partition: nvram, [000000800000 - 000001000000], size: 000000800000 (8.00 MB)
Partition: lk, [000001000000 - 000001200000], size: 000000200000 (2.00 MB)
Partition: bota1, [000001200000 - 000001400000], size: 000000200000 (2.00 MB)
Partition: secro, [000001400000 - 000001B00000], size: 000000700000 (7.00 MB)
Partition: seccfg, [000001B00000 - 000001B80000], size: 000000080000 (512. KB)
Partition: efuse, [000001B80000 - 000001C00000], size: 000000080000 (512. KB)
Partition: tee1, [000001C00000 - 000002200000], size: 000000600000 (6.00 MB)
Partition: bota2, [000002200000 - 000002800000], size: 000000600000 (6.00 MB)
Partition: efs, [000002800000 - 000003000000], size: 000000800000 (8.00 MB)
Partition: nvdata, [000003000000 - 000005000000], size: 000002000000 (32.0 MB)
Partition: param, [000005000000 - 000005800000], size: 000000800000 (8.00 MB)
Partition: recovery, [000005800000 - 000006800000], size: 000001000000 (16.0 MB)
Partition: boot, [000006800000 - 000007800000], size: 000001000000 (16.0 MB)
Partition: md1img, [000007800000 - 000009800000], size: 000002000000 (32.0 MB)
Partition: md1dsp, [000009800000 - 000009C00000], size: 000000400000 (4.00 MB)
Partition: keystore, [000009C00000 - 00000A400000], size: 000000800000 (8.00 MB)
Partition: omekeystore, [00000A400000 - 00000A780000], size: 000000380000 (3.50 MB)
Partition: proinfo, [00000A780000 - 00000AA00000], size: 000000280000 (2.50 MB)
Partition: para, [00000AA00000 - 00000AA80000], size: 000000080000 (512. KB)
Partition: persistent, [00000AA80000 - 00000AB00000], size: 000000080000 (512. KB)
Partition: steady, [00000AB00000 - 00000AC00000], size: 000000100000 (1.00 MB)
Partition: protect1, [00000AC00000 - 00000B400000], size: 000000800000 (8.00 MB)
Partition: protect2, [00000B400000 - 00000BC00000], size: 000000800000 (8.00 MB)
Partition: reserve2, [00000BC00000 - 00000C000000], size: 000000400000 (4.00 MB)
Partition: system, [00000C000000 - 0000CC800000], size: 0000C0800000 (3.01 GB)
Partition: cache, [0000CC800000 - 0000E5800000], size: 000019000000 (400. MB)
Partition: hidden, [0000E5800000 - 0000E9400000], size: 000003C00000 (60.0 MB)
Partition: userdata, [0000E9400000 - 0001D1FFBE00], size: 0000E8BFBE00 (3.64 GB)
GPT header successfully parsed
Get firmware version
Firmware info not found
write BL Code: Setting frequence to 21 Mhz
CMD Pullup Level: 1629 mV
CMD Active Level: 1773 mV
EMMC Device Information :
EMMC CID: 90014A4838473475920104D674741530
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 04D67474 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_04D67474_20180901_081254.extcsd
EMMC Init completed.
Opening file: GRANDPPLTE_CIS_SER.pit
Pit: GRANDPPLTE_CIS_SER.pit
Entry count: 34
The size of the last section has been updated
BL_G532GDXU1APJ7_CL9387420_QB11347255_REV00_user_low_ship_MULTI_CERT.tar.md5
The list of files in the firmware:
preloader.img
lk.bin
param.bin
trustzone.bin
efuse.img
Setting frequence to 21 Mhz
CMD Pullup Level: 1619 mV
CMD Active Level: 1763 mV
EMMC Device Information :
EMMC CID: 90014A4838473475920104D674741530
EMMC CSD: D02701320F5903FFFFFFFFE78A40002A
EMMC Manufacture : SKHYNIX , EMMC NAME: H8G4u , HEX: 483847347500 , S/N: 04D67474 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 1/2018
EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.7 (MMC 5.0, MMC 5.01)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H8G4u_04D67474_20180901_081319.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Writing PrimaryGPT at address: 000000000000
Writing BackupGPT at address: 0001D1FFBE00
Writing PIT at address: 000000004400
GPT-partitioning done
Unpacking file: preloader.img
Unpacking file: lk.bin
Unpacking file: efuse.img
Unpacking file: trustzone.bin
Unpacking file: param.bin
Partition name: BOOTLOADER
Filename: preloader.img , Offset: 000000000000 , filesize: 170240 bytes
eMMC switching to ROM2
Erasing partition...
Writing partition...
Done writing partition. Write speed: 335.41 KB/s
Partition name: LK
Filename: lk.bin , Offset: 000001000000 , filesize: 590336 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 494.44 KB/s
Partition name: EFUSE
Filename: efuse.img , Offset: 000001B80000 , filesize: 768 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 44.37 KB/s
Partition name: TEE1
Filename: trustzone.bin , Offset: 000001C00000 , filesize: 324352 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 859.50 KB/s
Partition name: PARAM
Filename: param.bin , Offset: 000005000000 , filesize: 747520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 876.87 KB/s
Partition CACHE : formatting as EXT4. Please wait ...
Formatting completed
Partition HIDDEN : formatting as EXT4. Please wait ...
Formatting completed
Partition USERDATA : formatting as EXT4. Please wait ...
Error writing at address: 0000E96E4000 ... Retry #1
Formatting completed
Check BOOT_PARTITION_EN for the selected vendor
All done time: [00:01:17:775 |