ZTE BLADE A310 QUALCOM FRP REMOVE DONE IN FTM MODE
Instructions :
1> Power off Zte Blade A310
2> Press and hold Volume Down button and connect Usb cable to Pc , its suppose to show Qualcom 9008 in device manager, install drivers if required
3> Open Octopus FRP TOOL and select ZTE > _TEST FTM QUALCOM .
4> Press Reset FRP
5> DONE
LOGS OF OPERATION Code:
Platform: ZTE
Selected model: _TEST FTM QUALCOMM
Put the phone into Factory mode:
1. Power phone OFF;
2. Press and hold "Vol-" button and connect USB cable.
Searching for a phone. Please wait...
Found phone on COM60
Mode: Diagnostic
Firmware released date: Dec 6 2016
Firmware released time: 08:31:40
Firmware compiled date: Sep 06 2016
Firmware compiled time: 09:00:00
SW version: MPSS.JO.1.1.c1-00052-8909_GEN_PACK-1
Rebooting to Qualcomm 9008 mode...
Found phone on COM236
Mode: Qualcomm 9008
Connecting...
Reading info...
QC Block ID: 03130E64
QC HW ID: 009600E100040000
QC CPU: Snapdragon 210 MSM8909
QC HASH: A229C5136618CF2EE91AD52A083978E2D6F23E46EFD96F2B5E31C19F36BDA22B
Searching loader...
Sending loaders...
Loader send successfuly.
Reconnecting...
Checking request..
Reading partition...
Reading info...
Brand: ZTE
Model: ZTE BLADE A310
Device: P809A50
Platform: msm8909
Android version: 6.0.1
Display ID: MTN_ZA_BA310_V1.2
Searching for signatures...
Resetting FRP lock..
FRP lock is successfully reseted!
Rebooting phone
Backup saved as ZTE__TEST FTM QUALCOMM_25-09-2018_14-59-30.dump file
Performed by 1.4.2.0 Software version.
Dump File :
https://mega.nz/#!9l5B2TAT!AazXn9NRJ...gNjMIoDxCfH4TA