GSM-Forum - View Single Post - Tell me any Walton Android Phone problem.i will Try to solve it only in one hour

jibonvai · 02-04-2019, 16:19

Try Thish Step
S2 Official Firmware, Flashtools & Drivers Download Link: Download

First: Install the driver

Please double-click on the program to install.

Program [GN_QC_EN_Driver_V1.1.0.0.exe]

Second: Download instructions

Before download, Need to check the following point:

Need to select USB connection mode to "Charge Mode" in order to identify the port and start downloading (The default USB connection mode is "Charge Mode").

Download tool： GNQC_DownLoadV1.6.8.0_EN.rar

After Downloading complete, please follow the steps：

1. Open GNQC_DownLoad flash tools

http://i.imgur.com/YjlTjSV.png
2. Click on the "BP Path" Button and "AP Path." Buttons and select BP and AP from software，Download mode drop-down(DL Mode) options is choose"General download (BP + AP)…
http://i.imgur.com/8doGQ4f.png
3. Connect Mobile with PC (Mobile must be remain off) and after found port then click download. Then start downloading…
http://i.imgur.com/JsFY5I9.png
4. Wait until the appears as shown in below figure,then the download is completed：
http://i.imgur.com/rGBtCFA.png
5. After the download completed, wait a few seconds, the phone automatically restart, the whole process is over。

6. To get all apps after on handset give the “Factory data reset”

I Hobe Solve Youre Problem Sir. And Knok Me Thanks.

Regard,
Jibonvai

02-04-2019, 16:19	#123 (permalink)
jibonvai Junior Member Join Date: Nov 2011 Location: Bangladesh Posts: 36 Member: 1688916 Status: Offline Thanks Meter: 8	Try Thish Step S2 Official Firmware, Flashtools & Drivers Download Link: Download First: Install the driver Please double-click on the program to install. Program [GN_QC_EN_Driver_V1.1.0.0.exe] Second: Download instructions Before download, Need to check the following point: Need to select USB connection mode to "Charge Mode" in order to identify the port and start downloading (The default USB connection mode is "Charge Mode"). Download tool： GNQC_DownLoadV1.6.8.0_EN.rar After Downloading complete, please follow the steps： 1. Open GNQC_DownLoad flash tools http://i.imgur.com/YjlTjSV.png 2. Click on the "BP Path" Button and "AP Path." Buttons and select BP and AP from software，Download mode drop-down(DL Mode) options is choose"General download (BP + AP)… http://i.imgur.com/8doGQ4f.png 3. Connect Mobile with PC (Mobile must be remain off) and after found port then click download. Then start downloading… http://i.imgur.com/JsFY5I9.png 4. Wait until the appears as shown in below figure,then the download is completed： http://i.imgur.com/rGBtCFA.png 5. After the download completed, wait a few seconds, the phone automatically restart, the whole process is over。 6. To get all apps after on handset give the “Factory data reset” I Hobe Solve Youre Problem Sir. And Knok Me Thanks. Regard, Jibonvai Last edited by jibonvai; 02-04-2019 at 16:25.