Code:
Welcome to Octoplus/Octopus Box LG Software version 2.9.3
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM61
Selected baudrate: 115200
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM42
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: LMX210ULMAAT-00-V10d-LAO-COM-MAR-16-2018-ARB00+
0
LAF Version: 1.1
Product ID: VS03S181010002645
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 359634-09-533222-0
MEID: 359634-09-533222
Bluetooth address: 00:57:C1:73:A9:81
Wi-Fi MAC address: 38:30:F9:1D:BA:8D
SPC: 537934
--------------------------------------------------------------------------------
Reading security area...OK
Backup saved to "SP200_359634095332220_08-03-2019_15-24-30.EEP"
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "SP20013b_to_X210ULMA10d_for_unlock_3.oct"...OK
Setting options...OK
Selecting firmware partitions...OK
Selected default partitions!
Reading partitions...OK
Do you want to format User Data?
Sending signature...OK
Writing preloader...OK
Writing pgpt...OK
Writing lk...OK
Writing lk2...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing logo...OK
Writing lo_bak_go...OK
Writing secro...OK
Writing tee1...OK
Writing tee2...OK
Writing rct...OK
Writing factory...OK
Writing efuse...OK
Writing md1img...OK
Writing md1dsp...OK
Writing md1arm7...OK
Writing md3img...OK
Writing system...OK
Writing lafbak...OK
Writing ftm...OK
Writing cache...OK
Writing OP...OK
Writing userdata...OK
Formating RCT...OK
Finalizing...OK
Performed by 2.9.3 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM61
Selected baudrate: 115200
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM42
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version:
LAF Version: 1.1
Product ID: VS03S181010002645
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 359634-09-533222-0
MEID: 359634-09-533222
Bluetooth address: 00:57:C1:73:A9:81
Wi-Fi MAC address: 38:30:F9:1D:BA:8D
SPC: 537934
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Opening "SP200_35963409533222_07-03-2019_12-52-10.eep"...OK
Writing EEPROM...OK
EEPROM succesfully repaired.
Performed by 2.9.3 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM61
Selected baudrate: 115200
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with
910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect
Micro USB cable.
Phone found at port COM42
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: LMX210ULMAAT-00-V10d-LAO-COM-MAR-16-2018-ARB00+
0
LAF Version: 1.1
Product ID: VS03S181010002645
IMEI:
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 359634-09-533222-0
MEID: 359634-09-533222
Bluetooth address: 00:57:C1:73:A9:81
Wi-Fi MAC address: 38:30:F9:1D:BA:8D
SPC: 537934
--------------------------------------------------------------------------------
Reading security area...OK
Backup saved to "SP200_359634095332220_08-03-2019_16-01-57.EEP"
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
--------------------------------------------------------------------------------
Opening "SP20013b_to_X210ULMA10d_for_unlock_3.oct"...OK
Setting options...OK
Selecting firmware partitions...OK
Selected default partitions!
Reading partitions...OK
Do you want to format User Data?
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing preloader...OK
Writing pgpt...OK
Writing lk...OK
Writing lk2...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing logo...OK
Writing lo_bak_go...OK
Writing secro...OK
Writing tee1...OK
Writing tee2...OK
Writing rct...OK
Writing factory...OK
Writing efuse...OK
Writing md1img...OK
Writing md1dsp...OK
Writing md1arm7...OK
Writing md3img...OK
Writing system...OK
Writing lafbak...OK
Writing ftm...OK
Writing cache...OK
Writing OP...OK
Writing userdata...OK
Formating RCT...OK
Finalizing...OK
Performed by 2.9.3 Software version.
Problem still the same screen size small and touch is not working......