No Life Poster
Join Date: Apr 2013 Location: $Kathmandu Nepal$
Posts: 2,071
Member: 1911970
Status: Offline
Sonork: 9741081772 Thanks Meter: 2,075 | Samsung J7 Prime G6100 Backup Emmc Dump Success Code: HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 2000 mV
CMD Active Level: 2629 mV
EMMC Device Information :
EMMC CID: 150100525831424D4210DC60C2BB84EC
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: RX1BMB , HEX: 525831424D42 , S/N: DC60C2BB , rev. 0x10
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RX1BMB_DC60C2BB_20190404_182859.extcsd
EMMC Init completed.
Get firmware version
Brand = samsung
Manufacturer = samsung
Device = on7xltechn
Model = SM-G6100
Phone platform = msm8953
CPU Abi = arm64-v8a
Android release = 8.0.0
Firmware version = R16NW.G6100ZHU2CRI8
Firmware date = Sun Sep 30 08:52:46 KST 2018
HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 2000 mV
CMD Active Level: 2640 mV
EMMC Device Information :
EMMC CID: 150100525831424D4210DC60C2BB84EC
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: RX1BMB , HEX: 525831424D42 , S/N: DC60C2BB , rev. 0x10
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RX1BMB_DC60C2BB_20190404_182922.extcsd
EMMC Init completed.
Operation: Reading from eMMC...
Reading from: ROM1 , start: 0x000000000000 , size: 0x000020000000
Output file: C:\Users\Salina\Desktop\0\g6100\EMMC_RX1BMB_ROM1_000000000000_000020000000.bin
eMMC switching to ROM1
Reading partition...
Done reading partition. Read speed: 952.49 Kb/s
All done time: [00:09:16:052]
HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 2000 mV
CMD Active Level: 2640 mV
EMMC Device Information :
EMMC CID: 150100525831424D4210DC60C2BB84EC
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: RX1BMB , HEX: 525831424D42 , S/N: DC60C2BB , rev. 0x10
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RX1BMB_DC60C2BB_20190404_183906.extcsd
EMMC Init completed.
Operation: Reading from eMMC...
Reading from: ROM2 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\Salina\Desktop\0\g6100\EMMC_RX1BMB_ROM2_000000000000_000000400000.bin
eMMC switching to ROM2
Reading partition...
Done reading partition. Read speed: 532.82 Kb/s
All done time: [00:00:13:081]
HiPower mode is ON
Setting frequence to 21 Mhz
CMD Pullup Level: 2000 mV
CMD Active Level: 2629 mV
EMMC Device Information :
EMMC CID: 150100525831424D4210DC60C2BB84EC
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400C
EMMC Manufacture : SAMSUNG , EMMC NAME: RX1BMB , HEX: 525831424D42 , S/N: DC60C2BB , rev. 0x10
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 8/2017
EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: RX1BMB_DC60C2BB_20190404_183929.extcsd
EMMC Init completed.
Operation: Reading from eMMC...
Reading from: ROM3 , start: 0x000000000000 , size: 0x000000400000
Output file: C:\Users\Salina\Desktop\0\g6100\EMMC_RX1BMB_ROM3_000000000000_000000400000.bin
eMMC switching to ROM3
Reading partition...
Done reading partition. Read speed: 482.98 Kb/s
All done time: [00:00:13:866] YOUTUBE https://www.youtube.com/watch?v=WbsxCUgyLqM&t=124s |