ERROR SERVER CONNECTION
HELP ME
================================================
Advance Turbo Flasher Found
================================================
Driver Version : 00021000
Library Version : 00030207
Box Type : ATF Nitro
Box Firmware : LogiCore 11.0.10
Software Version : v11.90
AdvanceBox SN : F46DB0D6FBA8C907EF840B05
=========================================
Please Try Again Later (Server Busy)
=========================================
================================================
ATF SOFTWARE IS NOT ACTIVATED ON THIS PC
Please Activate your ATF Software
================================================
* Follow these Instructions
1. Connect this PC to the INTERNET
2. Restart ATF Software
================================================
Box Successfully Initialized
================================================
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done
Quote:
Originally Posted by Advance-Box  @xtreme
@muzammal mudass
@omi17
@baalwy
1. DISCONNECT ATF BOX from USB Port
2. Run AdvanceBox.exe version 11.90 without BOX Connected
3. Go to "Product Support" ----> "Box Tools"
4. Make sure "ATF Nitro / Light" is selected on the right side
*** NOW CONNECT ATF BOX TO USB PORT ***
5. Click "Restore Box" and wait 2 to 5 minutes...
*** After Restore Box is Done, it will tell you to UPDATE FIRMWARE
6. Click "Update Firmware" and wait 2 to 5 minutes...
This way, box will be FULLY RESTORE Just like Brand New from Factory. |