Code:
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.00r2
VER : BP_R1.0.0
LEN : 4B6F50E7
CPU : SC7731_2341A_TCL
VER : 4024D_D7_DZ_V1.4_160719
Operation : Identify [ v2.00r2 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : 4024D_D7_DZ_V1.4_160719.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
ERROR : FDL NOT started!
Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!
Reconnect Power/Cable!
CM2SPD 1.27 log success
Quote:
Chinese Miracle II [SPD module] v 1.27
Set mode to : SP SC77xx [Model Select]
Loading : 4024D.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC7731_2341A_TCL
PacVersion : 4024D_D7_DZ_V1.4_160719
FastCheck : 0x00005783DB
Loading files ...
File : fdl1.bin
File : fdl2.bin
File : wnvitem.bin
File : wcnnvitem.bin
File : prodnv.img
File : SC7731_2341A_TCL.xml
Load Ok!
Start at : [06/06/2019 / 21:08:32]
Operation : Check/Read Info [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 45 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : 4024D
Model Brand : TCL
Model Device: PLAY_P1
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_18045
CompileDate : 19/07/2016 06:56:40
Project Ver : 4024D_D7_DZ_V1.4_160719
Model Ext : 4024D
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:17
Reconnect Power/Cable!
Finish at : [06/06/2019 / 21:08:49]
|