Quote:
Originally Posted by hitech care  (Only Need To Fix Loop (Repeat) Error In Above Log Post
SW Must Stop After Show Log With Hint Here Code: MTMng : Load PMT
PMTMng : 0x26
PMTMng : Update PMT Ok!
NVRM : nvitem.bin
NVMng : Load 0x22
NVMng : Init SRC
NVMng : Security DAMAGED!
NVMng : Backup to local storage : Ok!
NVMng : Trying use recover mode
NVMng : Security DAMAGED!
NVMng : Backup to local storage : Ok!
NVMng : Trying use recover mode
NVMng : Init DST
NVMng : NV has been destroyed! Forced Update disabled! Skip NVM flashing!)
After Tick Force Upgrade NV Works Well
Operation : Flash Firmware [ v2.00r2 ]
Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : Intex_Cloud_Style_4G_L155_I_M00_S06A_170303.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x26
PMTMng : Update PMT Ok!
NVRM : nvitem.bin
NVMng : Load 0x22
NVMng : Init SRC
NVMng : Security DAMAGED!
NVMng : Backup to local storage : Ok!
NVMng : Trying use recover mode
NVMng : Security DAMAGED!
NVMng : Backup to local storage : Ok!
NVMng : Trying use recover mode
NVMng : Init DST
NVMng : NV has been destroyed! Forced Update enabled! Repair security after!
NVMng : NVM block updated!
CODE : prodnv.img
ERASE : UBOOT
UBOOT : u-boot-spl-16k.bin
CODE : SC9600_sharkl_4modcsfb_EU_V110_3593_AA1_volte.dat
CODE : LTE_DSP.bin
CODE : SHARKL_DM_DSP.bin
CODE : SC9600_sharkl_wphy_5mod_volte_zc.bin
CODE : PM_sharkls_arm7.bin
CODE : fdl1x.bin
CODE : EXEC_KERNEL_IMAGE0.bin
CODE : boot.img
CODE : recovery.img
FSIMG : system.img
FSIMG : userdata.img
CODE : sprd_720p.bmp
CODE : sprd_720p.bmp
FSIMG : cache.img
ERASE : L_RUNTIMENV1
ERASE : MISC
FSIMG : persist.img
CODE : sysinfo.img
UBOOT : u-boot.bin
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:06:08 |
Yeah, my fault. Not check with completely empty device
Fixed.