| vivo y83 after flash set dead before set ok
this time not flash any firmware
Disconnect Mobile...
re-input Mobile Battery...
then connect usb to computer....
Make Sure your Mobie have power...
>>> Searching Mobile Com Port...
Get Mobile Port: COM25
>>> Driver Identifying name:
MediaTek USB Port
>>> 手机连接正常...
CPU_NAME: MT6765
>>> Reading Mobile Hardware info...Success
HW_Inf: 8A00 SW_Inf: CA00
>>> Initializing Mobile Phone...>>> Sending AUTH file...Success
>>> Downloading boot1 to Mobile...Success
手机状态:SYNC...
手机状态切换为 :brom...成功
确认手机状态为 :brom...
Initializationing BOOT2 ...
=====================Flash 类型(eMMC)==============
Flash Size: 0x0000000000000000 -> 0M
Flash ID: 0x0000000000000000
Flash Name: UNKNOWN_UNKNOWN
Flash Code: >>> switch hight speed re,wr port...
Get Com Port is: COM26
>>> Driver name:
MediaTek DA USB VCOM (Android)
>>>>Write Block preloader
Set Write Order Fail...
plase help me argent
br,
gsm_uzzal |