Originally Posted by lihua  Code: -403 ？？？？？
Identify UFS Chip.
UFS Chip Voltage: Low
VCC: 3309mV
VCCQ2: 1865mV
Manufacturer: SAMSUNG
ProductName: KM2B8001CM-BB01
SerialNumber: 332991b5ef1d
OemID: SAMSUNG_OEM_ID
Maximum Number of LUs: 8
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0x3A2E000000 / 232,736,000,000B / 232GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 3:
Block size: 0x1000
Size: 0x8000000 / 0,128,000,000B / 128MB
LUN 4:
Block size: 0x1000
Size: 0x100000000 / 4,000,000,000B / 4GB
LUN 5:
Block size: 0x1000
Size: 0x60000000 / 1,512,000,000B / 1GB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0x3B97800000 / 238,376,000,000B / 238GB
Read GPT From LUN 0.
Partition info successfully found
Found Data areas (firmware parts) count is: 13
---------------------------------------------
P0 (SSD) [0x6000 0x2000] Size: 8.0KB
P1 (PERSIST) [0x8000 0x2000000] Size: 32.0MB
P2 (MISC) [0x2008000 0x100000] Size: 1.0MB
P3 (KEYSTORE) [0x2108000 0x80000] Size: 512.0KB
P4 (FRP) [0x2188000 0x80000] Size: 512.0KB
P5 (VM-KYSTORE) [0x2208000 0x100000] Size: 1.0MB
P6 (VM-DATA) [0x2308000 0xa00000] Size: 10.0MB
P7 (VM-SYSTEM) [0x2d08000 0x8000000] Size: 128.0MB
P8 (VM-LINUX) [0xad08000 0x2000000] Size: 32.0MB
P9 (CACHE) [0xcd08000 0x10000000] Size: 256.0MB
P10 (SYSTEM) [0x1cd08000 0x136c00000] Size: 4.855GB
P11 (ODM) [0x153908000 0x10000000] Size: 256.0MB
P12 (USERDATA) [0x163908000 0x38ca6f3000] Size: 227.162GB
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x001CD08000 (4.855GB)
Unable to read prop.plist , code : 2
---------------------------------------------
Detected USERDATA USERDATA : 0x0163908000 (227.162GB)
Unable to mount USERDATA , code : 95
Z3X EasyJtag Software ver. 3.6.1.4
UFS Socket Info.
Serial: 0123512AF7EB3812EE
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 15.05.19
Read UFS LUN0, Address:1CD08000 ,Length: 136C00000
Output file :C:\Users\Administrator\Desktop\Reno\LUN0_8G\UFS_K M2B8001CM-BB01332991b5ef1d_LU0_0x1cd08000_SYSTEM_0x136c00000 .bin
Start
Can't read address 0x22308000, Code: -403, Reason: UAP SCSI: Command sense: MEDIUM_ERROR
Read, time taken: 392 sec. Average Reading Speed: 229 kB/s
Done. |