View Single Post
Old 01-04-2020, 19:38   #12 (permalink)
Patrosh
Junior Member
 
Join Date: Jan 2017
Posts: 10
Member: 2669985
Status: Offline
Thanks Meter: 9
donbris

I guess that you are going to remove the glass from Samsung curved oled? Let us know what model you exactly wanna refurb with this method.

Using dry ice is not a common way to do that. For LCDs like iPhone from 4 to 8+ it doesnt make any sense doing it this way or the freezer way. As I mentioned above an LCD needs a separate light source = the backlight. That means that if you put that guys in a freezer or remove the glass with dry ice it will allways and with condense water in the backlight. You need to replace the backlight.

For LCDs u should use wire method on a normal heatplate and for flat oleds its IMO the best choice too. Remove the bezel and find a good starting point to avoid that the wire gets between polarizer and LCD. For example every iPhone LCD:

If bad cracked use tape to cover the broken glass. Put it on your heatplate on 80 degrees. Remove the plastic frame. Then use an eagle blade and scrape the glue residues on the edges of the corner where u wanna start with your wire.
Then put pressure downwards on the glass and gently slight with the wire between the pol and glass. If you ve a plan and clean surface you will never hit the polarizer. Thats the key.
The thickness of the wire depends on your skills and preferences. For beginner 0,06 or 0,08 is a good value.

Freezer works really good for s6 edge, s7 edge and s8 models but above better use wire. If you are doing Note 9, S9 and above in freezer its easy to split the layers of the panel. For that method you need pressure to avoid the layers to get loosen and trap air inside. If this happens you can put them in your vacuum laminator for 5minutes to get the trapped air out and bond the layers together again. But its better to use wire for panels above note 8!

If need detailed help you should ask a detailed question buddy
  Reply With Quote
The Following 3 Users Say Thank You to Patrosh For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.13273 seconds with 6 queries