A105FN U2 Boot Loop Done Simple Flash FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-A105FN
Software version: 39.6
File analysis... OK
Total file size: 0x105E35831 (4190 Mb)
Searching USB Flash interface... COM32 detected
Setup connection... OK
Set PIT file... OK
Reading PIT from phone... OK
Sending sboot.bin.lz4... OK
Sending param.bin.lz4... OK
Sending cm.bin.lz4... OK
Sending vbmeta.img.lz4... OK
Sending boot.img.lz4... OK
Sending recovery.img.lz4... OK
Sending dt.img.lz4... OK
Sending dtbo.img.lz4... OK
Sending system.img.lz4... OK
Sending vendor.img.lz4... OK
Sending userdata.img.lz4... OK
Sending vbmeta.img.lz4... OK
Sending modem.bin.lz4... OK
Sending modem_debug.bin.lz4... OK
Sending cache.img.lz4... OK
Sending omr.img.lz4... OK
Sending product.img.lz4... OK
Flashing done (time - 00:04:03)
Done with Samsung Tool PRO v.39.6 |