GSM-Forum - View Single Post

Elasunuas · 05-07-2020, 18:07

COOLPAD 8297D flash done

100% working

Flash files count is :15
Action : Firmware update.
Selected Model: Coolpad: Coolpad 7295C
Exe version: GSMSHIELD MTK 1.6
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM5)
Boot mode: Preloader
BBCHIP: 6592 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6592
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (58Gb+16384Mb) TOSIBA 0x303038473932
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 110100303038473932 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM14)
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.

05-07-2020, 18:07	#1 (permalink)
Elasunuas Freak Poster Join Date: Dec 2014 Location: NIGERIA Posts: 303 Member: 2312129 Status: Offline Thanks Meter: 139	COOLPAD 8297D flash done 100% COOLPAD 8297D flash done 100% working Flash files count is :15 Action : Firmware update. Selected Model: Coolpad: Coolpad 7295C Exe version: GSMSHIELD MTK 1.6 Scenario: [0]Safe Flash Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM5) Boot mode: Preloader BBCHIP: 6592 0 ca00 Using Algo 1. Phone detected...Please wait Sending DA agent, please wait... ---------------------------------------------------- BaseBand CPU :MT6592 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 2 GB DRAM ---------------------------------------------------- EMMC: (58Gb+16384Mb) TOSIBA 0x303038473932 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 110100303038473932 : 00000000000000 EMMC UA SIZE: 0x1d2000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x1d2880000 [7.290 GB] Status: USB_HIGH_SPEED Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detected : DA USB VCOM Port (COM14) Backup preloader saved in firmware directory. Warning, flashing preloader disabled! If you change android version, preloader must be flashed. Starting flash. Wait untill phone will start charging. [0]All done.