Nokia TA1212 Error : Fail to init protocol! Operation : Identify [ v1.20 ]
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM Port (COM244)
MODE : NOKIA USB SERIAL
PORT : 244
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 4F6A691784EA7E3F10725F020E425393
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
BOOT : BDDS : 30
BOOT : PSRM : Init
BOOT : PSRM : 0003
Boot done!
SWVer : PISCES.10.01.11.p1
FLASH : 00EF : 0060 : 0018 : 0000
PRDC : 059Z0X8
IMEI[1] : xxxxxxxxxxxxx
IMEI[2] : xxxxxxxxxxxxxxx
NCK : 20 digits
PROV : 24407000
Saved as : xxxxxxxxxxxxxxx.mtsec
Saved to : C:\InfinityBox\BEST2\Backup\
Done!
Elapsed: 00:00:27
Reconnect Power/Cable! Operation : Reset Settings [ v1.20 ]
1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM Port (COM244)
MODE : NOKIA USB SERIAL
PORT : 244
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 4F6A691784EA7E3F10725F020E425393
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : PISCES.10.01.11.p1
BOOT : SWR : 10.01.11
AGENT : Look for suitable BootChain in DA ...
AGENT : Device AutoID failed! Error : Fail to init protocol!
Send log and report.log to support! Include device info also!
Reconnect Power/Cable! |