| NEED QMOBILE Infinity_triple FLASH FILE.HANG ON LOGO
MOBILE HANG ON LOGO. FORMAT IT BUT SAME CONDITION.NEED QMOBILE Infinity_triple FLASH FILE.
Card found: S/N : 53471D69 , v0144
Chinese Miracle II [SPD module] v 1.27
Set mode to : SP [SC773x] eMMC [Android 5.x]
Operation : Check/Read Info [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : Infinity_triple
Model Brand : android_1
Model Device: Infinity_triple
AndrVersion : 8.1
BaseBand CPU: SP7731GEA_HDR
CompileDate : 8/23/2019 8:18:14 AM
Project Ver : J106_EG01_Infinity_triple_V1.0_20190823
Model Ext : Infinity triple
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:32
Reconnect Power/Cable!
Operation : FlashIC ReadOnly/BadBlock Test [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Device boot not done
Check Drivers
Try again
Reconnect Power/Cable!
Operation : FlashIC ReadOnly/BadBlock Test [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 3 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!
Prepare test data ...
Test flow #0 ...
Test flow passed!
Test flow #1 ...
Test flow passed!
Test flow #2 ...
Test flow passed!
Test flow #3 ...
Test flow passed!
Test flow #4 ...
Test flow passed!
Test flow #5 ...
Test flow passed!
Finalize Ok!
Test passed successfully!
Elapsed: 00:00:24
Reconnect Power/Cable! |