Quote:
Originally Posted by Brka  Yes ....
- Load DA file from unpacked archive, \DA Folder
- Load authentication file from \DA folder
- Go to Format tab in SPFT, tick validation and use MANUAL format.
- Input start address and length :
Start address : 0x1c3a0000
Length : 0x100000
- Connect powered off device to usb cable, wait for finish
- FRP should be gone. If not, manually do factory reset from recovery.
If, for some reason tablet don't boot after (or if you missed or wrogly entered start address),
just reflash it with ROM file given in link below.
p.s. If you have problem in booting, try another DA agent or hold vlume keys before insert usb cable on powered off device.
b.r.
Alex |
Hi all, new to this forum so please be gentle with me
I have purchased a batch of 27 Lenovo Tabs from an online retailer that I am going to refurb and sell. But they are all locked. I have managed to restore the stock rom with no issues but cannot remove the FRP. Not sure what mistake I am making but each time I try following the instructions here I get a Bios error.
Can any one please point me in the right direction? Thanks Steve