INFO OR RESET LOG Code:
Z3X EasyJtag Software ver. 3.7.0.17
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2072 mV
CMD Active Level:2392 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------
eMMC CID : 90014A68423861503E03C0893AAFC5E4
eMMC CSD : D02700328F5903FFFFFFFFEF8E400042
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 12/2018 Rev.0x3
eMMC NAME: hB8aP> , S/N: 3230218927
eMMC NAME (HEX): 68423861503E
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
RPMB Info mmc_switch_part Error, Reason: CARD Ready Timeout Error
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: hB8aP>_3230218927_20200815_1505.extcsd
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x003F000000 (3.352GB)
Short EXT fs info:
Size: 3.352GB
Block size: 4.0KB
Inode size: 256
Inodes: 219888
Short Android info:
Build ID: OPM1.171019.026
Release Base ID: 8.1.0
Security Path: 2020-07-05
Architecture ABI: arm64-v8a
Device manufacturer: OPPO
Build Description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20200710.012336 release-keys
Backup saved: BuildProp_20200815_1505.txt
---------------------------------------------
Detected USERDATA USERDATA : 0x0158000000 (23.745GB)
Unable to mount USERDATA , code : 95
Userdata Superblock contents::
BEC4D75B A8E8AAF1 AEFEBDC5 67A8B0CB 401ABF1B FED1097E 7ECB64C9 9B6914AA ¾Ä×[¨èªñ®þ½Åg¨°Ë@.¿.þÑ ~~ËdÉ›i.ª;
2E39263C C6F8027A D711A328 F9319282 4BF23797 7C21829F 55D441D9 799ADBE8 .9&<Æø.z×.£(ù1’‚Kò7—|!‚ŸUÔAÙyšÛè;
7159ECD1 458C6449 6CEAEFDD CABEA537 7C29ED3B 1EFB881F B21098EB 099CAA7B qYìÑEŒdIlêïÝʾ¥7|)í;.û..²..ë œª{;
794A5481 03CDAC02 C8D9E86F 3022A3B5 0DAC12C3 F31F5378 FFD7B2BA 74AAD4D2 yJT..ͬ.ÈÙèo0"£µ.¬.Ãó.SxÿײºtªÔÒ;
9067C8FB 7CA230A9 AE357AB0 2E914D77 C31C12FD 3AD89F52 C92D0E5A 600CFF8C .gÈû|¢0©®5z°.‘MwÃ..ý:ØŸRÉ-.Z`.ÿŒ;
A98597A3 46C2FBE6 5E6DEDDC BCA7DD1A 9450E5D0 490C806E 9A25FBE2 9861C955 ©…—£FÂûæ^míܼ§Ý.”PåÐI..nš%ûâ.aÉU;
9B89CDFD DE57E99E 8526BF42 DF257360 0AE3F165 35CC7010 6ED9C6CB 3A7BBF86 ›‰ÍýÞWéž…&¿Bß%s`.ãñe5Ìp.nÙÆË:{¿†;
E4EAC068 4785725F F2D399C5 03C9BA6E 256E918C 6C3D626F 1A0F5DF9 16469187 äêÀhG…r_òÓ.Å.ɺn%n‘Œl=bo..]ù.F‘‡;
Done.
Running:Format FRP Partition...
Z3X EasyJtag Software ver. 3.7.0.17
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2062 mV
CMD Active Level:2660 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------
eMMC CID : 90014A68423861503E03C0893AAFC5E4
eMMC CSD : D02700328F5903FFFFFFFFEF8E400042
eMMC Manufacturer ID: 0090 , OEM ID: 014A
eMMC Date: 12/2018 Rev.0x3
eMMC NAME: hB8aP> , S/N: 3230218927
eMMC NAME (HEX): 68423861503E
EMMC ROM1 (Main User Data) Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
RPMB Info mmc_switch_part Error, Reason: CARD Ready Timeout Error
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x001FB00000 (256.0MB) , formatting...
Done.
Detected LINUX(Android) CONFIG : 0x002FC80000 (32.0KB) formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0158000000 (23.745GB) , formatting...
Done.
Done.
Done.